performance land rover 2.28 petrol engine
performance land rover 2.28 petrol engine
Author
Discussion

neilsfishing

Original Poster:

3,502 posts

222 months

Thursday 7th October 2010
quotequote all
Hi
My boy has just aquired a 1968 series series 2 which we will restor, I was wondering what the hp was on the engine, I have dirven it and I know its not a lot
Thanks
Neil

BLUETHUNDER

7,881 posts

284 months

Thursday 7th October 2010
quotequote all
From new they ranged from 67-74 bhp.

budrover

300 posts

228 months

Thursday 7th October 2010
quotequote all
Speak to Rowland at ACR.

Besides doing the majority of engines for off road racers, he does a lot of tuning on the 2 1/4 petrol and alway dispatching complete tuned up engines to the States and Europe.

http://www.automotivecomp.com/landrover_perf.html

100SRV

2,328 posts

266 months

Thursday 7th October 2010
quotequote all
I'll second that - fitted an ACR performance plus kit (cylinder head, inlet manifold, lumention) to what was a slow 7:1 compression ratio Series One, now it sounds like a rally car and has plenty of get-up and go. It will do an indicated 60mph on level road with 32" diameter tyres and the overdrive engaged, plenty for something with no seat belts and non-assisted drum brakes!

topsparks

1,202 posts

271 months

Thursday 7th October 2010
quotequote all
Stick an LS6 in it Neil!,but be warned stopping will be interesting!

300bhp/ton

41,030 posts

214 months

Friday 8th October 2010
quotequote all
neilsfishing said:
Hi
My boy has just aquired a 1968 series series 2 which we will restor, I was wondering what the hp was on the engine, I have dirven it and I know its not a lot
Thanks
Neil
Is it diesel of petrol?

HP and performance is not these engines strong points. If you really want more poke look at either a V8 or Tdi conversion. Suspect it'll be cheaper and far more affective than anything you can do to the old 2.25 units.

neilsfishing

Original Poster:

3,502 posts

222 months

Friday 8th October 2010
quotequote all
300bhp/ton said:
neilsfishing said:
Hi
My boy has just aquired a 1968 series series 2 which we will restor, I was wondering what the hp was on the engine, I have dirven it and I know its not a lot
Thanks
Neil
Is it diesel of petrol?

HP and performance is not these engines strong points. If you really want more poke look at either a V8 or Tdi conversion. Suspect it'll be cheaper and far more affective than anything you can do to the old 2.25 units.
Its not performance I want to increase, I was just curious, the idear is as this landy is so good, is to put it back as it is now but with a good chassy and fully working.
A tomb rader project will folow with a V8