anyone got a D2 and 5 mins to check something for me?

[Graham]

Hi, all currently trying to fit 2nd row seats into my Discovery 2 commercial.

all fine so far but i dont have the locating brackets that the seats lock into when they are in the upright position.

could anyone take a couple of pics for me.

I think there are 3 hoops that bolt to the floor and possbly one on the side of the wheel arch

Cheers

Graham

[Psimpson7]

I can grab you some pics when my other half gets home (will be in about 5hrs time)

[Psimpson7]

Sorry Graham, Took slightly longer than anticipated!

if you need any other pics just let me know. These are from a 5seater 03 D2a. All the mounts are in the floor. There are none in the arches.

floor mount:



seat base hinges:



Seat in down position:



catch on seat base:

Edited by Psimpson7 on Tuesday 21st December 09:33

[Graham]

Ta, thats just what I needed. Just need to locate a set now! I think I've got a pair on order from apb, but if they turn up before thursday is anyones guess. worst case is i have to buy another set of rear seats from equicar as they wont sell the brackets seaparatly..grrr.. especially as most people buythe seats to replace damaged ones not fit into commercials so have the brackets already...


ho hum...


cheers

Graham

[Graham]

Brackets turned up yesterday and fitted in about 5 mins, a task made easier by the fact that the body fittings were already tapped, making it just a case of bolting them in. I had to tap some of the seat hinge mounts at the front.

Just need to locate some outer seat belts and job jobbed.