Metal suppliers / workshops
Metal suppliers / workshops
Author
Discussion

dazzztay

Original Poster:

447 posts

212 months

Saturday 23rd November 2013
quotequote all
I'm after a business to buy bits of ally and mild steel from, in small quantities and cut to size. Does anyone know a good place who will post orders out and not sting me for the "minimum order of £50" type thing each time.

As an example, I'm after 2 bits of mild bar, 50mm ish in diameter and 15mm ish deep. I'm after 2 bits of curved bar, 15mm ish diameter, 250mm ish long with a constant bend along the bar resulting in 90 degrees of bend between the ends.

Etc....

Any help would be great!

Celtic Dragon

3,354 posts

266 months

Saturday 23rd November 2013
quotequote all
Id start looking for model engineering factors, ones that supply model train stuff. Failing that yellow pages for engineering companies or prototypers.

silverfoxcc

8,478 posts

176 months

Saturday 23rd November 2013
quotequote all

GnuBee

1,339 posts

246 months

Sunday 24th November 2013
quotequote all
I'd buy from eBay for the basic rod/bar stock - I'm regularly buying 6082, 7075 aluminium and it's always cheaper than my local stock holders (Parkers).

The larger eBay stock holders will cut and you don't get forced into buying an entire 4m length for example.

Jetblackonetenth

694 posts

240 months

Sunday 24th November 2013
quotequote all
I could help out with bits and pieces, more on the sheet side (mild steel, aluminium and stainless) and small rounds, flats and tubes etc.
Not sure if I have and 15 round from memory but order from suppliers fairly regularly and don't mind tagging things on if your not desperate.

give me a mail or look at website on profile

Also have recently purchased an NC tube bender, very handy

Only up the road in Nottingham

Steve57

2,174 posts

273 months

Monday 25th November 2013
quotequote all
Im pretty sure i can help with the above items, certainly the flat sheet and im sure i have some 50mm mild steel bar that can have 15mm cut from the end. Were mainly into thin sheet (ductwork manufacturing). Pm if you need any more info.

Steve

madbadger

11,754 posts

275 months

Monday 25th November 2013
quotequote all
Nice to see offers of help on PH.

I was going to offer to make some. wink

D Stanley

97 posts

273 months

Monday 25th November 2013
quotequote all
Try these guys

http://www.metalsupermarkets.com/about-us/

You only pay for what you need, they have almost everything you could want and they cut it for you. Minimum spend £10.

D Stanley

97 posts

273 months

Monday 25th November 2013
quotequote all
Try these guys

http://www.metalsupermarkets.com/about-us/

You only pay for what you need, they have almost everything you could want and they cut it for you. Minimum spend £10.

Crafty_

14,231 posts

231 months

Monday 25th November 2013
quotequote all
Is this a regular order ? if so I think you might find you can save money by ordering lengths and cutting/bending it yourself.

Metal Supermarkets are good but my local one doesn't have a tube bender, they'll happily chop stuff to what you want though.