Racking Pins - HOW much?!
Racking Pins - HOW much?!
Author
Discussion

Burrito

Original Poster:

1,705 posts

251 months

Thursday 28th November 2013
quotequote all
After a minor near miss with our "bent nail" racking pins not securing a horizontal bar, we're looking for around 3k proper racking pins. We've had a quote from our usual supplier but even after haggling they're asking for 30p each.

Anyone supply or know where I can get these for a reasonable price?


Burrito

Original Poster:

1,705 posts

251 months

Friday 29th November 2013
quotequote all
Bump for the evening crowd.

maser_spyder

6,356 posts

213 months

Sunday 1st December 2013
quotequote all
No idea, but at 30p, I'll take some, I did exactly the same last week!

Burrito

Original Poster:

1,705 posts

251 months

Sunday 1st December 2013
quotequote all
maser_spyder said:
No idea, but at 30p, I'll take some, I did exactly the same last week!
How much did you pay? I'll meet you in the middle wink

Seriously though, how many do you need?

Petrolhead_Rich

4,659 posts

223 months

Tuesday 3rd December 2013
quotequote all
5p for the part, 25p for the insurance if some racking falls on someone due to a faulty clip......

mybrainhurts

90,809 posts

286 months

Tuesday 3rd December 2013
quotequote all
Made by Porsche, I'll be bound. Oh, sorry, thought you said £30.

Burrito

Original Poster:

1,705 posts

251 months

Tuesday 3rd December 2013
quotequote all
Petrolhead_Rich said:
5p for the part, 25p for the insurance if some racking falls on someone due to a faulty clip......
Given that the original "bent nail" device, which was supplied by the racking supplier/fitter and which failed, how do I make a claim? biggrin

Petrolhead_Rich

4,659 posts

223 months

Saturday 7th December 2013
quotequote all
Burrito said:
Petrolhead_Rich said:
5p for the part, 25p for the insurance if some racking falls on someone due to a faulty clip......
Given that the original "bent nail" device, which was supplied by the racking supplier/fitter and which failed, how do I make a claim? biggrin
Sue the supplier getmecoat

SidJames

1,399 posts

264 months

Saturday 7th December 2013
quotequote all
Burrito said:
After a minor near miss with our "bent nail" racking pins not securing a horizontal bar...
How did the beam fail in the first place? The pin is principally there to stop the beam being knocked off by a forklift, not to hold the beam up loaded if the beam flange (or er missus!) fails.

Haven't seen that design of pin before, who manufactured the racking? I could make an enquiry for you.

edit : massive assumption on the "near miss" being made there!

Edited by SidJames on Saturday 7th December 22:20

Burrito

Original Poster:

1,705 posts

251 months

Monday 9th December 2013
quotequote all
SidJames said:
How did the beam fail in the first place? The pin is principally there to stop the beam being knocked off by a forklift, not to hold the beam up loaded if the beam flange (or er missus!) fails.

Haven't seen that design of pin before, who manufactured the racking? I could make an enquiry for you.

edit : massive assumption on the "near miss" being made there!

Edited by SidJames on Saturday 7th December 22:20
The beam was holding up an empty shelf and was struck from below by a picker pulling a tub out and down.

The nail is supposed to stop the beam from moving but was still located in the vertical beam after the horizontal had swung out.

This is what they look like.


And with the newer style securing pins.

SidJames

1,399 posts

264 months

Tuesday 10th December 2013
quotequote all
ooooh, how much don't I like the original pin!

Thought you meant APR pins like this..... http://www.useltd.co.uk/wp-content/uploads/Used-St...

Sorry, can't help much with that type of racking pin.


Steve57

2,174 posts

273 months

Thursday 12th December 2013
quotequote all
If you have a spare you could send over to me i might be able to help. biggrin Probably wouldnt be identical but im sure we could make something similar.

feel free to drop me a mail on Steve at swardco dot com