Laser cutting
Author
Discussion

ReaderScars

Original Poster:

6,087 posts

207 months

Sunday 19th January 2014
quotequote all
Does anyone carry out, or can you recommend an outfit who can laser cut man made fabric - for example a reasonably heavy duty acrylic?

I´d like to supply a PDF document at 100%, measuring 1m x 1.5m which will have cutting outlines manually nested within it.

Can anyone advise if they can carry this out, or can anyone recommend an outfit with a decent size flatbed laser cutter please?

NormanD

3,208 posts

259 months

Sunday 19th January 2014
quotequote all
Have a word with Roy at

http://www.allsigns.eu/

ReaderScars

Original Poster:

6,087 posts

207 months

Sunday 19th January 2014
quotequote all
Thanks for the suggestion/recommendation so far, will look into those.

matjk

1,112 posts

171 months

Sunday 19th January 2014
quotequote all
I've got a 1.5 meter x 1.2 meter laser cutter, it's only an 80watt laser but it will cut aycrlic no issues, need to see the patern and maybe test a bit of the fabric but can see no issues

ReaderScars

Original Poster:

6,087 posts

207 months

Sunday 19th January 2014
quotequote all
matjk said:
I've got a 1.5 meter x 1.2 meter laser cutter, it's only an 80watt laser but it will cut aycrlic no issues, need to see the patern and maybe test a bit of the fabric but can see no issues
Great to hear, will send you a PM tomorrow so I can email you the pattern for an estimate of the cost.

ReaderScars

Original Poster:

6,087 posts

207 months

Monday 20th January 2014
quotequote all
matjk said:
I've got a 1.5 meter x 1.2 meter laser cutter, it's only an 80watt laser but it will cut aycrlic no issues, need to see the patern and maybe test a bit of the fabric but can see no issues
PM sent.

edcs

1,452 posts

201 months

Monday 20th January 2014
quotequote all
We've got a few lasers here at work too, so if matjk can't help then I might be able to.

ReaderScars

Original Poster:

6,087 posts

207 months

Monday 20th January 2014
quotequote all
edcs said:
We've got a few lasers here at work too, so if matjk can't help then I might be able to.
Thanks, will get in touch if that turns out to be the case.

matjk

1,112 posts

171 months

Monday 20th January 2014
quotequote all
Replied to the PM Mark
Thanks
Matt

Kozy

3,169 posts

249 months

Tuesday 21st January 2014
quotequote all
I use Cut Laser Cut in Vauxhall.

ReaderScars

Original Poster:

6,087 posts

207 months

Tuesday 21st January 2014
quotequote all
Thanks for the recommendation, Kozy just waiting to hear back from matjk.

matjk

1,112 posts

171 months

Tuesday 21st January 2014
quotequote all
Cut laser cut are very trendy but expensive, i like their website its cool, we are more 'Industrial' and not as trendy but the results are the same, our main business is laser engraving but we have a big cutter that gets little use.

ReaderScars

Original Poster:

6,087 posts

207 months

Tuesday 21st January 2014
quotequote all
Ahem, any chance you could email me about the quote/fabric sample when you get a chance (sooner rather than later if you can wink )!

matjk

1,112 posts

171 months

Tuesday 21st January 2014
quotequote all
Sorry, had a million emails to answer today as i took a few days to do a show and your one was missed of the bottom, I have replied but basically a little sample is perfect, soon as i get it i will run it and get you a price over.
Thanks
Matt

ReaderScars

Original Poster:

6,087 posts

207 months

Tuesday 21st January 2014
quotequote all
No probs Matt, sorry to rush you!

Kozy

3,169 posts

249 months

Wednesday 22nd January 2014
quotequote all
matjk said:
Cut laser cut are very trendy but expensive, i like their website its cool, we are more 'Industrial' and not as trendy but the results are the same, our main business is laser engraving but we have a big cutter that gets little use.
Interesting.

What price would you be able to do on raster engraving anodised aluminium sheets, 400 x 300 x 1.5mm?

ReaderScars

Original Poster:

6,087 posts

207 months

Wednesday 5th February 2014
quotequote all
Just wanted to update the thread to say that, as matjk was the first to respond directly to my enquiry, ended up using his services - anyone else who needs laser cutting should get in touch with him - all apsects of the service he provided were exactly what you'd expect from a pro outfit.

Looking forward to having additional stuff run out in the future by him, put it that way.

matjk

1,112 posts

171 months

Wednesday 5th February 2014
quotequote all
Glad you liked the cutting, the stuff cuts great, glad you reopend the thread as i had missed the last post and not replied! I will do that now !! What are you making with them?

Kozy

3,169 posts

249 months

Wednesday 5th February 2014
quotequote all
matjk said:
I had missed the last post and not replied! I will do that now !! What are you making with them?
These: http://blackartgraphics.com/examples/

I currently get them made as a batch of 6 arranged as one work piece to keep costs down.


Edited by Kozy on Wednesday 5th February 23:16

matjk

1,112 posts

171 months

Wednesday 5th February 2014
quotequote all
Ok, it would be easier and probably cheaper for us to do them as individual artworks, i would recommend a fiber laser for this, better detail and whiter mark than what your getting now, can you email me over a cad file and maybe post a bit of the anodised sheet and i can run a sample for you.
I can quote you then but i pretty confident you will like our prices.
Thanks
Matt