Any Headers Involved in Filtration Mesh?

[andoverben]

I need to get hold of some Fine Mesh 5 - 10 Microns for use in a filtration unit.

Before I start looking further afield I wondered if there were any pistonheaders out there involved in such a thing?

To start with I will only need a few square feet of it however ideally I will need to purchase it in larger quantities in the short future.

Ben

[andoverben]

Sorry I should maybe Clarify, I need Filter Pads which are about 5 Microns the Mesh doesn't have to be.

[slammedvanman]

friend of mine works for these guys in their sales department, not sure if they can help:
www.endecotts.com/otherproducts/filters_screens.htm

[david_s]

5-10 micron is very fine for a mesh, are you sure you need that fine?

Do you want stainless or plastic, nylon is most popular for some reason.

I may have some nylon monofilament mesh around 25 micron, e-mail me through my profile if you want some help.

edited to add: Didn't read properly. Let me know what you want,I have a warehouse full of filters from 0.1 micron to 1000 micron

Edited by david_s on Friday 21st July 18:15