Any product designers.prototyping types on here?
Discussion
Wife and friend have an idea for a simple product.
It needs design and manufacture.
It will be small, made primarily of plastic and may have one moving part.
We need to make an initial exploration of how best to maximise the concept and get a rough idea of whether it could be manufactured at a price point which would make it worth pursuing.
Any product designers on here?
It needs design and manufacture.
It will be small, made primarily of plastic and may have one moving part.
We need to make an initial exploration of how best to maximise the concept and get a rough idea of whether it could be manufactured at a price point which would make it worth pursuing.
Any product designers on here?
Hi,
Aside from running a race livery design studio (Racewraps), we also undertake quite a few product design related jobs, under the name Q3D Studios ltd. What we can do is design and build a virtual version of the product, which can then be taken directly to investors or manufacturers. Depending on the exact product type also, we have a contacts that would be able to help make a working prototype.
This goes without saying but make sure you don't discuss your idea with anyone (even some friends, I heard of some bad stories) without getting them to sign an NDA first. You can normally find sample NDA's on the internet, which can be adapted to suite.
Cheers,
Andy
Aside from running a race livery design studio (Racewraps), we also undertake quite a few product design related jobs, under the name Q3D Studios ltd. What we can do is design and build a virtual version of the product, which can then be taken directly to investors or manufacturers. Depending on the exact product type also, we have a contacts that would be able to help make a working prototype.
This goes without saying but make sure you don't discuss your idea with anyone (even some friends, I heard of some bad stories) without getting them to sign an NDA first. You can normally find sample NDA's on the internet, which can be adapted to suite.
Cheers,
Andy
Something a bit out the box, but have you tried a local university? When I was studying, our department (Mechanical and Design Engineering) would take on a lot of work such as this, as it boosts income to the department. You get a wealth of knowledge, expertise, equipment and other facilities at your disposal. I'm not sure of the pricing, but it may be worth looking into in.
small + plastic + volume = injection moulding = approx. £10K/part setup (that's per part, if you have multiple parts, factor in multiples of that cost). Therefore provided you chuck out a few 100Kunits/year the toolmaking costs are recouped, if you don't you can be left smarting.
You really need to get a good feel for the volume you can sell, and therefore if injection moulding would work for you. If not you could get them indivudually machined/ laser'd but your unit cost would be a lot higher for the same volume.
Good luck!
You really need to get a good feel for the volume you can sell, and therefore if injection moulding would work for you. If not you could get them indivudually machined/ laser'd but your unit cost would be a lot higher for the same volume.
Good luck!
Gassing Station | Business | Top of Page | What's New | My Stuff



