USB drive
Author
Discussion

rene7

Original Poster:

626 posts

114 months

Wednesday 15th August 2018
quotequote all
Hi
My 16GB San disk USB stick has recently become 'Write Protected', any ideas why and how can I Unlock/Re-format it for normal use, there's no sliding tab like a normal SD card for this purpose on the drive.
All data currently on the disc can be read etc I just can't Update files on the drive or add new files. There's 4-5 GB empty on the drive I just can't access it - WhY?
The data on drive is NOT important I have other copies of them.
Any Suggestions
TA

cobra kid

5,629 posts

271 months

Wednesday 15th August 2018
quotequote all
Can you copy the files off it onto a computer? Maybe just ditch it and buy a new one?

rene7

Original Poster:

626 posts

114 months

Wednesday 15th August 2018
quotequote all
cobra kid
Yep I can copy files from it - just can't write too it???
You think drive is fked?

TonyRPH

13,554 posts

199 months

Wednesday 15th August 2018
quotequote all
If you're ok with computers and the DOS prompt you could probably fix it with diskpart.

However, you need to be competent to do this, as you risk destroying data on other drives in your system.

If you're happy doing this, I can provide instructions...


rene7

Original Poster:

626 posts

114 months

Wednesday 15th August 2018
quotequote all
Tony RPH
Yes please - sounds interestingthumbup

Monty Python

4,813 posts

228 months

Wednesday 15th August 2018
quotequote all
https://www.easeus.com/partition-manager-software/...

Edited by Monty Python on Wednesday 15th August 14:20

TonyRPH

13,554 posts

199 months

Wednesday 15th August 2018
quotequote all
Go to a DOS prompt (Administrator)

Run diskpart

In the diskpart console, type 'list disk' (no ticks) as per below.

Look for your USB drive (in the example below, Disk 1 is the USB drive) it's usually quite easy to tell from the size.

Then type 'sel disk X' (where 'X' is the number of your USB disk)

If you type 'list disk' again, the selected disk will have a "*" next to it.

Then type 'clean'

This should *completely* erase the disk and allow you to reformat it to the full size.


C:\windows\system32>diskpart

Microsoft DiskPart version 6.1.7601
Copyright (C) 1999-2008 Microsoft Corporation.
On computer: TONY-LAPTOP

DISKPART> list disk

Disk ### Status Size Free Dyn Gpt
-------- ------------- ------- ------- --- ---
Disk 0 Online 232 GB 0 B
Disk 1 Online 483 MB 0 B

DISKPART> sel disk 1

Disk 1 is now the selected disk.

DISKPART> clean

DiskPart succeeded in cleaning the disk.

DISKPART> list disk

Disk ### Status Size Free Dyn Gpt
-------- ------------- ------- ------- --- ---
Disk 0 Online 232 GB 0 B
* Disk 1 Online 483 MB 483 MB

DISKPART>


Forgot to add - type 'exit' to quit diskpart.

Edited by TonyRPH on Wednesday 15th August 14:39

rene7

Original Poster:

626 posts

114 months

Wednesday 15th August 2018
quotequote all
TonyRPH
I've tried the method you suggest - I got this:>
>

>
Also tried the 'regedit' method suggested by MontyPython above that didn't work either??


TonyRPH

13,554 posts

199 months

Wednesday 15th August 2018
quotequote all
That's interesting.

Did you try the registry change mentioned in the post from Monty Python?

Alternately, grab a Linux live ISO - SystemRescuCD is very good for this.

But if you're not familiar with Linux....

I wonder if your USB disk is a fake, as it's only showing as 14G in diskpart?





rene7

Original Poster:

626 posts

114 months

Wednesday 15th August 2018
quotequote all
TonyRPH
Thanks for replying:.>
I bought the disk from ASDA 3 years ago, so probably NOT a fake - on occasions its been completely full 16GB.
I tried the Regedit method which seemed to work but had no effect on USB stick.
It's strange it shows only 14GB but the other PC HDD's are showing incorrect values too?
They are only a coupla quid new so I'll buy another - interestingly I had a 64GB sandisk USB fail completely a few weeks ago. but that was totally unreadable unlike this one?
Oh Well many thanks for your helpthumbup