HELP! Ethernet doesn't have valid IP configuration
HELP! Ethernet doesn't have valid IP configuration
Author
Discussion

kowalski655

Original Poster:

15,237 posts

174 months

Tuesday 21st August 2018
quotequote all
I'm at my wits end with my PC that refuses to connect to the net via Ethernet wires through the walls. Diagnosis says it doesn't have valid IP configuration. I've tried installing "Reliable multitask protocol"- it only has manufacturer option, and getting it to obtain IP address automatically via properties of TCP/IPv4. Repeatedly pulled the cable out too. Still no joy,even after network reset

Can anyone advise how I can get back online, or I'm condemned to using this crap mobile.
None of the other 2 PCs that connect via Ethernet have this problem

TIA

Order66

6,740 posts

280 months

Tuesday 21st August 2018
quotequote all
You need to eliminate the cable, then the network card.

Cable is simple - just plug it in to another ethernet cable, if it works your cable is bad.

Network card - get a USB card and try that.

Could also try getting device manager to remove the card, and completely re-install the drivers.

mp3manager

4,254 posts

227 months

Tuesday 21st August 2018
quotequote all
I get this occasionally with Sky.

Just type your thread title into google and you get this.

https://windowsreport.com/ethernet-valid-ip-config...

It helped me fix it.

Lemming Train

5,567 posts

103 months

Tuesday 21st August 2018
quotequote all
I had this exact problem myself not long ago and it turned out to be the ethernet cable. I can't remember which one fixed it but I know one was marked as CAT 5e and the other one was just CAT 5. One of the cables works and the other one doesn't, yet the one that doesn't works fine on a different PC so I assume there's some incompatibility with the ethernet card/driver.

Brother D

4,452 posts

207 months

Wednesday 22nd August 2018
quotequote all
Work your way thru the layers.

1. Do you have link lights flashing?
2. Does the PC show connected in the task bar?
3. IP address. - Do a right click on the network symbol, properties, advance, TCP IP V4, ensure boxes are all ticked for obtain address and DNS automatically.
4. Reboot the PC and router...

kowalski655

Original Poster:

15,237 posts

174 months

Wednesday 22nd August 2018
quotequote all
Thanks for all the help. I tried all the suggestions last night but still came up with diddley squat

The power and web lights are flashing in the plug,not the internet one. It shows unknown network and no internet frown

I can't even connect to the stty WiFi from the +net router upstairs

kowalski655

Original Poster:

15,237 posts

174 months

Wednesday 22nd August 2018
quotequote all
Update...çhanged TCP/IP 4 to +net fixed IP address,that's changed error message to "default gateway not available", which isn't a kit of help

Merry

1,512 posts

219 months

Wednesday 22nd August 2018
quotequote all
You're not using powerline adaptors are you?

xeny

5,548 posts

109 months

Wednesday 22nd August 2018
quotequote all
kowalski655 said:
The power and web lights are flashing in the plug,not the internet one.
Say what?

What happens if you try swapping this machines for one of the ones that does work - does the fault move with the PC, or stay associated to the wired connection this PC is plugged in to?

kowalski655

Original Poster:

15,237 posts

174 months

Wednesday 22nd August 2018
quotequote all
Yes,am using powerline plugs that send internet via the electric wires. Have swapped wires with my son and still have same problems.
Currently trying a system roll back

WinstonWolf

72,863 posts

270 months

Wednesday 22nd August 2018
quotequote all
Sounds like your powerline adapters aren't working correctly. Unlug them then plug them back in.

(IT bod for over a quarter of a century)

UpTheIron

4,058 posts

299 months

Wednesday 22nd August 2018
quotequote all
As has been said (ish), try the following:

- where you have a PC that works, physically pick it up and move it to where the non-working one is.
- reverse the changes you have made on the non-working PC, the try that PC in place of the working one in the other room.
- reboot your router in case it's DHCP server has failed
- look at your power line adapters and the manual for them. What lights are working and which aren't?

UpTheIron

4,058 posts

299 months

Wednesday 22nd August 2018
quotequote all
I've just re-read your 2023 post, that suggests your power line adapters are ok. It will be obvious based on the lights on it but try swapping them around and see if that had any effect too.

Merry

1,512 posts

219 months

Wednesday 22nd August 2018
quotequote all
Before you do anything if you can (ie if your computer is a laptop) take it to where the plusnet router is and plug it directly into the back of it using an ethernet cable. If it works its the powerline adaptors. If not its the laptop. It'll help people assist you...

kowalski655

Original Poster:

15,237 posts

174 months

Wednesday 22nd August 2018
quotequote all
Thanks again all
System restore didnt work due to some unspecified error-thanks M$oft ffor the guess smile
Before I dragged it upstairs my son suggested pressing the button on top of the powerline plug by the PC for 10 seconds...that worked clapwoohoo
he did say that I should do the same for the 1 upstairs but didnt need to biggrin
Well done that 14 year old and everyone who suggested stuff..before I threw the damn thing through the window! PH delivers as always

beer