iMac 2009, HDD replacement, options?
iMac 2009, HDD replacement, options?
Author
Discussion

megaphone

Original Poster:

11,723 posts

282 months

Monday 10th September 2018
quotequote all
My late 2009 iMac 27" is beginning to play up, bit sluggish etc. I'd really like to upgrade to a SSD, but what are my options, any one done it? I'm happy to DIY, looked at various videos etc and I'm happy to have a go.

Options..

1 Straight SSD swap, 1TB, but which one? There are heat sensor issues I believe. 1TB SSD are still a bit expensive.

2. Replace the DVD/optical drive with a smaller SSD, then run two drives. OWC used to do a kit, but can't find it anymore. I'd still need to replace the main HDD as it's old, noisy, original. Again with what?

3 ??? Any more options?

I don't want to spend a fortune, but would like to give the iMac a boost and a few more years of use.

dxg

10,842 posts

291 months

Monday 10th September 2018
quotequote all
Don't worry about the heat sensors, you can override it with software. I use this: http://www.hddfancontrol.com/

Bikerjon

2,211 posts

192 months

Monday 10th September 2018
quotequote all
Personally I think the 2009 model is a bit old to justify a 1 TB SSD. I'd put in a 1 TB hybrid.

Big_Dog

996 posts

216 months

Monday 10th September 2018
quotequote all
Not sure if 2009 is USB3 or not? I used a USB3 caddy with an SSD in it stuck to the back. On the principle if it didn't improve things then I could get busy with the screwdrivers and razorblades. It worked fine probably about a 30% speed up and easy.
If no USB3 then you could probably use the thunderbolt port.

Bikerjon

2,211 posts

192 months

Monday 10th September 2018
quotequote all
The 2009 is USB 2 and firewire I believe. Even the SATA interface is only 3gig so I wouldn't go too crazy upgrading this model

dxg

10,842 posts

291 months

Monday 10th September 2018
quotequote all
I have one and swapped an SSD into it about 5 years ago. It's still my main machine! Although the display is now dying. I'm interested in seeing what the new mac mini is like.

The advantage of this imac is that it was the last of the repairable macs. Not sure I'd be so keen on shelling out for an expensive sealed box with a lifespan of maybe 4 or 5 years when this repairable one has lasted for so long!

rich888

2,610 posts

230 months

Monday 10th September 2018
quotequote all
Go for it...

Quite coincidentally I changed the ageing (and possibly failing) 320GB HDD in my 2007 24" iMac a few weeks ago for a super-fast 480GB Kingston SSD after watching a few videos on YouTube on how to do it.

I only use the internal drive to store the software, and use several easily replaceable external drives for everything else, so figured I could do without a hugely expensive internal 1TB SSD for the time being. I just re-stuck the heat temperature probe over the new drive and haven't suffered any issues to date.

I purchased a 2.5-3.5-Inch Adapter Drive to make the fitting of the new drive a painless changeover, and a standalone Dual Bay SATA External Hard Drive Docking Station for 2.5 Inch and 3.5 Inch HDD/SSD which resembles a toaster to copy the contents of the old HDD onto the new SSD.

My 24" iMac screen was held on by magnets so I purchased 2 LCD Screen Opening Heavy Duty Dent Remover Sucker Puller Suction Cups (their description).

All the parts were purchased from Amazon.

The whole job from start to finish took me approx 45 minutes to complete, though I'm pretty sure I could do it quicker than this. Is the 2nd time I've taken the iMac to pieces and each time it's been nerve-racking but worthwhile.

The SSD has definitely increased the speed of what is a very old iMac, and though the new iMacs are faster and the screens much improved, I still like the way it runs and it works plenty fast enough for my needs. Gives me a couple more years grace to save up for a new one!

Have posted more info on the Apple OSX/Apple support thread sub-forum on here.

megaphone

Original Poster:

11,723 posts

282 months

Tuesday 11th September 2018
quotequote all
Thanks for replies. Yes it is USB2 and has a Firewire port. It's SATA 2. I suspect it will be left out of the next OS upgrade, hopefully not.

I had not considered a Hybrid drive, will do some research. Anyone actually installed one in a Mac? Really only want to take it apart once, so need to make the correct decision.

I do not really do anything intensive, it is just used for general office work, I have a MacBook Air, with 256GB flash, it flies compared to my iMac.

megaphone

Original Poster:

11,723 posts

282 months

Tuesday 11th September 2018
quotequote all
dxg said:
Don't worry about the heat sensors, you can override it with software. I use this: http://www.hddfancontrol.com/
Thanks, yes have seen this on various sites.

gert biggens

45 posts

125 months

Tuesday 11th September 2018
quotequote all
I did exactly this with my 2009 iMac, and it is now significantly faster than the higher-spec 2013 machine I use at work. I had a 500GB SSD put in - I find 500GB is amply big enough for day-to-day use, though you will need more storage for other files. I got a technician to fit the SSD mainly because the Mac was at the doctors already, for a strange wheel-of-death fault caused by a new router; else I'd have had a go at fitting it myself. The technician counselled against hybrid drives, citing reliability and speed issues.

megaphone

Original Poster:

11,723 posts

282 months

Tuesday 11th September 2018
quotequote all
Thanks. TBH I could probably get away with a 500GB SSD, my current 1TB HDD is only half full, after 9 years of use!

I can get a 500GB Samsung SSD for under £100.

Maybe that's the way to go.

dxg

10,842 posts

291 months

Tuesday 11th September 2018
quotequote all
rich888 said:
My 24" iMac screen was held on by magnets so I purchased 2 LCD Screen Opening Heavy Duty Dent Remover Sucker Puller Suction Cups (their description).
Pffft!!! I used the suction cup from my mobile phone's windscreen mount! This is pistonheads, after all...

dxg

10,842 posts

291 months

Tuesday 11th September 2018
quotequote all
Also, if you are going to do it, get a can of compressed air so you can give the thing a clean out while you're in there. Also use it to get the dust off the back of the glass screen cover before you remount it. You *don't* want random bits of fluff staring at you afterwards...

Bikerjon

2,211 posts

192 months

Tuesday 11th September 2018
quotequote all
dxg said:
You *don't* want random bits of fluff staring at you afterwards...
This is by far the worst part of the job and if you have any OCD tendencies then this bit might tip you over the edge! I reckon it's virtually impossible to get it completely clear first time.

Bikerjon

2,211 posts

192 months

Tuesday 11th September 2018
quotequote all
megaphone said:
Thanks. TBH I could probably get away with a 500GB SSD, my current 1TB HDD is only half full, after 9 years of use!

I can get a 500GB Samsung SSD for under £100.

Maybe that's the way to go.
Yep if you don't need the capacity then go the SSD route. I wouldn't even bother going with the Samsung as you can get a cheaper Crucial or Sandisk for about £70 and any brand of SSD should outlast the life of this machine.

rich888

2,610 posts

230 months

Tuesday 11th September 2018
quotequote all
Bikerjon said:
megaphone said:
Thanks. TBH I could probably get away with a 500GB SSD, my current 1TB HDD is only half full, after 9 years of use!

I can get a 500GB Samsung SSD for under £100.

Maybe that's the way to go.
Yep if you don't need the capacity then go the SSD route. I wouldn't even bother going with the Samsung as you can get a cheaper Crucial or Sandisk for about £70 and any brand of SSD should outlast the life of this machine.
Have added up what I spent on the drive change as below:

Kingston 480GB SSD cost £77.98
Twin pack suckers for the screen £8.45
2.5" - 3.5" adapter (for the internal drive HDD - SDD) £18.08
External hard drive docking station £28.99
Torx screwdriver set £5.19

Time wise it took me 45 minutes of in-depth concentration and taking it to bits and putting it all back together, quite astonishingly I wasn't left with any spare screws which was quite a relief.

rich888

2,610 posts

230 months

Tuesday 11th September 2018
quotequote all
dxg said:
rich888 said:
My 24" iMac screen was held on by magnets so I purchased 2 LCD Screen Opening Heavy Duty Dent Remover Sucker Puller Suction Cups (their description).
Pffft!!! I used the suction cup from my mobile phone's windscreen mount! This is pistonheads, after all...
Haha, if you're going to do it the PH way, then use a sink plunger as demonstrated on one of the YouTube iMac screen removal videos wink

Craikeybaby

12,179 posts

256 months

Wednesday 12th September 2018
quotequote all
megaphone said:
Thanks for replies. Yes it is USB2 and has a Firewire port. It's SATA 2. I suspect it will be left out of the next OS upgrade, hopefully not.
I have a 2010 iMac and my understanding is that it will be left out of the next upgrade (expected in a a few weeks).

megaphone

Original Poster:

11,723 posts

282 months

Monday 24th September 2018
quotequote all
Just an interim update on this. Thanks for this who contributed, I've been a bit busy so only just got back on this. After a bit more research and thinking and taking comments above, I've decided to go for a Seagate Firecuda hybrid drive, gone for 2TB as it was only £30 more than the 1TB. As suggested, it's an older machine now and the cost of a 1TB SSD with extras would run to near £200.

Should arrive this week for fitting later or over weekend. I'll do a clean instal of High Sierra and then migrate my stuff across, I'll let you know how I get on. Am a bit apprehensive about taking the front off the iMac, have done loads of this type of stuff before but......keep thinking if I balls it up how much a new iMac will cost me.

TartanPaint

3,367 posts

170 months

Monday 24th September 2018
quotequote all
I did mine with a hybrid drive too. Initially it feels a bit quicker, but it's not SSD quick, and you soon can't tell any difference again.

For taking the screen off, I bought two big glass suction lifters, and it worked a treat!