What is a WAN port?
Author
Discussion

dave7108

Original Poster:

395 posts

185 months

Friday 28th September 2018
quotequote all
I've just got a new Sagecom talktalk modem. I want to use my BT wholehomewifi though to access the internet. Should the BT disc go in to the back of the talktalk router on one of the 4 ethernet ports or the WAN? I've tried looking on talktalk website and all it tells me is that there is a WAN port on the box but not what it is for!


Edit:
If i plug it in to the WAN then BT disc cant connect to the internet. If I plug it in to the ethernet then my devices can see the BT disc but it gives them a strange IP address of 169.254.108.xxx

Edited by dave7108 on Friday 28th September 09:12

Gren

2,030 posts

283 months

Friday 28th September 2018
quotequote all
The WAN port is what connects your router to the outside world. In this case connecting the router to the modem.

craig1912

4,706 posts

143 months

Friday 28th September 2018
quotequote all
It goes into one of the four ethernet ports. Not sure about the IP addresses - mine are all 192 something

dave7108

Original Poster:

395 posts

185 months

Friday 28th September 2018
quotequote all
OK that makes sense, the talktalk router has a vdsl port so the wan port is not needed. Anybody able to shed any light on the 169 address issue?

budgie smuggler

6,088 posts

190 months

Friday 28th September 2018
quotequote all
dave7108 said:
OK that makes sense, the talktalk router has a vdsl port so the wan port is not needed. Anybody able to shed any light on the 169 address issue?
Yes it means there's something wrong with the DHCP server. Not sure in your case if that would be served from the BT devices or the talktalk thing. But whichever it is, your computers can't reach it, or it's serving them nonsensical address leases.

thebraketester

15,852 posts

169 months

Friday 28th September 2018
quotequote all
The WAN port on the Talk Talk router is for if you are using your own modem.

The Talk Talk "modem" will be a modem and router in one box. Your phoneline should be plugged into the "broadband" port.

What you need to do is turn off the wifi part of the talk talk router and plug the BT wholehomewifi into one of the LAN ports.


I am not sure how the BT system works but you want the talk talk modem taking care of DHCP. Take a screen shot of the talk talk modem setup page.

It doesn't matter if your local IP is 192.168.0.1 or 10.0.1.1 etc etc.

Edited by thebraketester on Friday 28th September 10:00

bristolracer

5,959 posts

180 months

Friday 28th September 2018
quotequote all
Reset the BT units, they are possibly still looking for the old router?