Cat5 v Cat6 Cabling
Discussion
The sparky is coming on Monday to start the first fix and he's asked if i want Cat5 or Cat6 cabling going from our hub to data points around the house.
I've told him Cat6 as from a quick google it seems to be for higher bandwidth (though i doubt our broadband will get fast enough to ever test this...we currently get 35mb download and hope to get upgraded to 70mb in a few months!).
Is there any reason i should be considering Cat5 instead?
I've told him Cat6 as from a quick google it seems to be for higher bandwidth (though i doubt our broadband will get fast enough to ever test this...we currently get 35mb download and hope to get upgraded to 70mb in a few months!).
Is there any reason i should be considering Cat5 instead?
Either supports 1gbit ethernet. From wikipedia:
"10GBASE-T, or IEEE 802.3an-2006, is a standard released in 2006 to provide 10 Gbit/s connections over unshielded or shielded twisted pair cables, over distances up to 100 metres (330 ft).[43] Category 6a is required to reach the full distance of 100 metres (330 ft) and category 6 may reach a distance of 55 metres (180 ft) depending on the quality of installation, determined only after re-testing to 500 MHz."
Note that cabling to a spec that will officially support 10gig requires more care than the average person will achieve (bend radius, pinch points etc) but in reality I've got 10gig to run over poorly laid cables more often than not.
Agree with the sentiment I'd rather have 2 * cat 5 than 1 *cat 6 in most places.
Note also that 2.5g and 5g will run over cable that is to poor to work with 10g and look as if they'll be substantially cheaper to deploy at least for the next few years.
"10GBASE-T, or IEEE 802.3an-2006, is a standard released in 2006 to provide 10 Gbit/s connections over unshielded or shielded twisted pair cables, over distances up to 100 metres (330 ft).[43] Category 6a is required to reach the full distance of 100 metres (330 ft) and category 6 may reach a distance of 55 metres (180 ft) depending on the quality of installation, determined only after re-testing to 500 MHz."
Note that cabling to a spec that will officially support 10gig requires more care than the average person will achieve (bend radius, pinch points etc) but in reality I've got 10gig to run over poorly laid cables more often than not.
Agree with the sentiment I'd rather have 2 * cat 5 than 1 *cat 6 in most places.
Note also that 2.5g and 5g will run over cable that is to poor to work with 10g and look as if they'll be substantially cheaper to deploy at least for the next few years.
If the choice is between 2 x Cat5e and 1 x Cat6, then 2 x Cat5e.
There shouldn't be a big difference in price though really, and to be honest you should always run lots of cables even if you don't terminate them straight away. You can add more equipment at any time, but you can't replaster etc the walls easily once you've got stuff in.
There shouldn't be a big difference in price though really, and to be honest you should always run lots of cables even if you don't terminate them straight away. You can add more equipment at any time, but you can't replaster etc the walls easily once you've got stuff in.
Cat6 is harder to run & install properly than Cat5e. It's thicker & stiffer & needs to be made off carefully if it's to show the benfits. All the ancilliary hardware (modular jacks, patch panels, patch cables etc) also need to be Cat6 & the parts should be compatible with each other.
Cat5e is good enough unless you plan to use the cabling to transmit HDMI video - then the additional bandwidth is useful. For network/IP traffic Cat5e is more than adequate.
Did he mean Cat6 or Cat6a? Is he using sheilded or unsheilded cable?
Cat5e is good enough unless you plan to use the cabling to transmit HDMI video - then the additional bandwidth is useful. For network/IP traffic Cat5e is more than adequate.
Did he mean Cat6 or Cat6a? Is he using sheilded or unsheilded cable?
Just chuck in cat 6 think it’s an extra £15 +VAT for 300metres
If it’s just thrown in it won’t show you any benefit, tbh I doubt you will get anywhere near it’s limitations
You can put HD down a cat5e but may be limited in 10yeas time when TVs are running 16k or something ridiculous
If the cabling is there you can use it for what you want, I have no plans to put a hdmi matrix in, but I cabled it just incase
If it’s just thrown in it won’t show you any benefit, tbh I doubt you will get anywhere near it’s limitations
You can put HD down a cat5e but may be limited in 10yeas time when TVs are running 16k or something ridiculous
If the cabling is there you can use it for what you want, I have no plans to put a hdmi matrix in, but I cabled it just incase
AMST09 said:
Out of interest how much do they want to install each point? If you don’t mind me asking
Not sure re costs per point - it was specified in the tender doc we went out to builders with (i.e. install 10 data points and cable back to central hub under the stairs). The sparky asked me if I wanted cat5 or cat6 so the builder will picking up the tab.
Cat 6 it is then!
Thanks all
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff



Personally, would go for two Cat5 over a single Cat6, but thats just me.