Ubiquity mesh help
Discussion
Help !
What I’ll have is a poe switch up in the loft and a pie switch in the detached garage ie no cables Ethernet concerns.
What I want is to be able to walk from one end of the house to the other to the end of the garden to the garage on the same WiFi network and it not drop. Also in the house there is a mix of 2.4 and 5 ghz devices.
Is it just a bunch of these Ubiquiti UAP-AC-PRO-E UniFi AP AC PRO-e - (Enterprise Computing > Wireless Networking) https://www.amazon.co.uk/dp/B079DSTX99/ref=cm_sw_r...
Or something else?
What I’ll have is a poe switch up in the loft and a pie switch in the detached garage ie no cables Ethernet concerns.
What I want is to be able to walk from one end of the house to the other to the end of the garden to the garage on the same WiFi network and it not drop. Also in the house there is a mix of 2.4 and 5 ghz devices.
Is it just a bunch of these Ubiquiti UAP-AC-PRO-E UniFi AP AC PRO-e - (Enterprise Computing > Wireless Networking) https://www.amazon.co.uk/dp/B079DSTX99/ref=cm_sw_r...
Or something else?
I recently switched from Ubiquity kit to a Netgear ORBI mesh - massively better all-round, better speed for less nodes, much more capable to handle a "domestic" situation than the ubiquity (i.e. walls, chimneys, up and down floors).
When you say you want to walk from one end to the other and it not drop, do you mean literally retain full signal while walking, or do you mean simply get good signal in all areas? The former really isn't possible on any technology.
Even with a "mesh" network you won't be able to walk seamlessly from one end of the property to the other without your device going through the disconnect/reconnect process. As you pass from one "node" to the other your client device will go through the wifi disconnect/reconnect cycle and leading up to this point there can be a loss of signal strength and then momentary complete loss, depending on how gracefully the client switches wifi networks. If you were doing something like streaming a youtube video you wouldn't really notice, but if you were on something realtime (like a skype call) then you can/will notice the connection drop momentarily.
Don't get me wrong - Mesh is the way to go for a large domestic coverage, but it isn't the panacea that some think it is.
When you say you want to walk from one end to the other and it not drop, do you mean literally retain full signal while walking, or do you mean simply get good signal in all areas? The former really isn't possible on any technology.
Even with a "mesh" network you won't be able to walk seamlessly from one end of the property to the other without your device going through the disconnect/reconnect process. As you pass from one "node" to the other your client device will go through the wifi disconnect/reconnect cycle and leading up to this point there can be a loss of signal strength and then momentary complete loss, depending on how gracefully the client switches wifi networks. If you were doing something like streaming a youtube video you wouldn't really notice, but if you were on something realtime (like a skype call) then you can/will notice the connection drop momentarily.
Don't get me wrong - Mesh is the way to go for a large domestic coverage, but it isn't the panacea that some think it is.
Mesh is not really the terminology you should be using as it really describes wireless access point talking together wirelessly. The Unifi APs are not strictly 'mesh' products, they do two outdoor models that have mesh capability.
In a domestic house I use Unifi UAP-AC-Lite, they cost less and perform well. Fit more for better coverage. The trick for seamless 'hand-off' is to set your APs at a lower power, this will help your client device jump to the stronger AP.
As above there are alternative domestic solutions. How many APs do you need?
In a domestic house I use Unifi UAP-AC-Lite, they cost less and perform well. Fit more for better coverage. The trick for seamless 'hand-off' is to set your APs at a lower power, this will help your client device jump to the stronger AP.
As above there are alternative domestic solutions. How many APs do you need?
Edited by megaphone on Tuesday 23 October 09:33
Edited by megaphone on Tuesday 23 October 09:37
Unify should be fine for your home. I have an LR on the landing and a 'Lite' in the conservatory - they work fine. You'll never get 'perfect' hand over between the devices like you would with an enterprise class setup with a dedicated controller costing £££ but it's good enough and devices switch to the stronger signal before the possibility of dropouts. The good thing with going the Ubiquiti route you can add more 'lites' at around 70 quid as needed.
However, the cheaper lites are 24v PoE, not 48v like the link in your OP.
However, the cheaper lites are 24v PoE, not 48v like the link in your OP.
The later models of UAP-AC-Lite are both 48v and 24v. POE. https://www.ubnt.com/unifi/unifi-ap-ac-lite/
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff


