Cloning HDD to SSD problems
Author
Discussion

peterperkins

Original Poster:

3,458 posts

273 months

Friday 16th November 2018
quotequote all
Typical scenario. Upgrading laptop hdd to ssd.

Attached both drives to a standalone Windows 7 desktop machine for the cloning operation.

Using macrium reflect software intelligent sector copy etc but tried others.
Cloning keeps failing with error 9 CRC errors at 76% done. presumably due to errors on source hdd.
Done recommended help stuff

Ran chkdsk /r etc to fix and mark bad sectors. Cloning still fails as above..

Any other ideas or freeware solutions?


WinstonWolf

72,863 posts

270 months

Friday 16th November 2018
quotequote all
I tend to begrudgingly look on this as an opportunity to install a fresh copy of Windows.

Install 'Doze on new SSD, restore data files from the old HDD, job done.

devnull

3,873 posts

188 months

Friday 16th November 2018
quotequote all
Cloning isn't really the best way here as you are moving from one type of storage to another.

You are much better off just installing your OS on the new drive and copying your files and reinstalling your programs.

Mr Pointy

13,443 posts

190 months

Friday 16th November 2018
quotequote all
devnull said:
Cloning isn't really the best way here as you are moving from one type of storage to another.

You are much better off just installing your OS on the new drive and copying your files and reinstalling your programs.
Why? lots of people have cloned an HDD onto an SSD perfectly sucessfully.

devnull

3,873 posts

188 months

Friday 16th November 2018
quotequote all
Mr Pointy said:
devnull said:
Cloning isn't really the best way here as you are moving from one type of storage to another.

You are much better off just installing your OS on the new drive and copying your files and reinstalling your programs.
Why? lots of people have cloned an HDD onto an SSD perfectly successful.
Of course, it is possible, but I am of the opinion that if you are doing this, then why not just start afresh. Both processes are taking time, and this one is taking time to resolve the copying issue.

Penelope Stopit

11,209 posts

140 months

Friday 16th November 2018
quotequote all
devnull said:
Mr Pointy said:
devnull said:
Cloning isn't really the best way here as you are moving from one type of storage to another.

You are much better off just installing your OS on the new drive and copying your files and reinstalling your programs.
Why? lots of people have cloned an HDD onto an SSD perfectly successful.
Of course, it is possible, but I am of the opinion that if you are doing this, then why not just start afresh. Both processes are taking time, and this one is taking time to resolve the copying issue.
I am of the same opinion but....someone here once pointed out to me about all the problems reinstalling programmes
I am now of the opinion that as long as you have no problem reinstalling programmes the job should be done from scratch

captain_cynic

17,652 posts

126 months

Friday 16th November 2018
quotequote all
devnull said:
Cloning isn't really the best way here as you are moving from one type of storage to another.
This... but there is another solution. Do a backup from the old drive and a restore onto the new drive. Windows has a tool for this, as do many others. When I put a larger SSD into my laptop I simply did a Windows backup/restore tool.

You'll need a USB drive to back the original drive up to, but that's a good thing as it gives you a backup to go back to if need be.

peterperkins

Original Poster:

3,458 posts

273 months

Friday 16th November 2018
quotequote all
The problem is as usual a large number of specific and established programs on the old drive.
That would take hours to download and setup again on the new drive.

I agree a fresh install is nice to get rid of the dross but it's a PITA as we know.

deckster

9,631 posts

286 months

Friday 16th November 2018
quotequote all
peterperkins said:
The problem is as usual a large number of specific and established programs on the old drive.
....and a much larger number of old, unused, worthless and resource-consuming programs that you've probably forgotten about completely.

Make a record of all the programs you actually use (I bet it's fewer than you think), make sure you have license keys and install media available, and start from scratch. Yes, it'll take a few hours, but it's totally worth it.

Mr Pointy

13,443 posts

190 months

Friday 16th November 2018
quotequote all
devnull said:
Mr Pointy said:
devnull said:
Cloning isn't really the best way here as you are moving from one type of storage to another.

You are much better off just installing your OS on the new drive and copying your files and reinstalling your programs.
Why? lots of people have cloned an HDD onto an SSD perfectly successful.
Of course, it is possible, but I am of the opinion that if you are doing this, then why not just start afresh. Both processes are taking time, and this one is taking time to resolve the copying issue.
But a starightforward clone doesn't take much time, especially via a USB 3.0 port. It took less than 30 minutes the last time I did it. On a fresh install it could take much longer than that to do the Windows updates alone.

OP: this has gone a bit off track but if you've Googled the error & it hasn't helped than try a clone to another drive, even a another HDD. That would at least eliminate the destination drive as the source of the problem. Samsung do a cloning program which while it isn't as good as Macrium might be wirth a shot:
https://www.samsung.com/semiconductor/minisite/ssd...


peterperkins

Original Poster:

3,458 posts

273 months

Saturday 17th November 2018
quotequote all
Sorted it in the end.

The source drive had some bad sectors, eventually using clonezilla managed to get it to ignore them, and complete clone of good data to SSD.

Thanks for the ideas. It's def snappier now it's back up and running also with doubled ram.

Penelope Stopit

11,209 posts

140 months

Saturday 17th November 2018
quotequote all
peterperkins said:
Sorted it in the end.

The source drive had some bad sectors, eventually using clonezilla managed to get it to ignore them, and complete clone of good data to SSD.

Thanks for the ideas. It's def snappier now it's back up and running also with doubled ram.
In which case.....Was there anything on the bad sectors?
I don't like the idea of cloning
I do like the best method....I think this has been mentioned above

Install OS and all programmes to original PC/HDD
Now use Windows to create an image of the clean install
If having problems in the future, use image to carry out a fresh install

Even then, I don't like the idea of using the image of a HDD to install to a SSD because of the difference in their workings

Derek Smith

50,031 posts

279 months

Saturday 17th November 2018
quotequote all
I'm glad the problem has been sorted.

I recently cloned an HDD to an SSD although I ran the original installation of Win10 back to a 'clean installation'. Worked well, and the increase in speed was remarkable. It was as if I'd doubled my RAM.

However, before I had reloaded all my programmes the SSD failed.

I'm a bit nervous of trying another SSD so I'm using the old HDD.

I'm now on my third installation of MS Office so will have some phoning to do next time I suppose. I was pleasantly surprised that the software manufacturers which rquird me to obtain another authentication code for were very cooperative and did it all by email. NCH was the fastest to send the necessary; less that 18 hrs. MS could learn something here.

The best thing about reloading programmes is not loading those that one hardly, if ever, uses.


Mr Pointy

13,443 posts

190 months

Saturday 17th November 2018
quotequote all
Derek Smith said:
I recently cloned an HDD to an SSD although I ran the original installation of Win10 back to a 'clean installation'. Worked well, and the increase in speed was remarkable. It was as if I'd doubled my RAM.

However, before I had reloaded all my programmes the SSD failed.

I'm a bit nervous of trying another SSD so I'm using the old HDD.
What brand was the SSD? Samsung are very reliable (usually)

Derek Smith

50,031 posts

279 months

Saturday 17th November 2018
quotequote all
Mr Pointy said:
hat brand was the SSD? Samsung are very reliable (usually)
It was a Kingston, UV400 - 480 GB. The reviews were pretty good and it was supposed to be very reliable too.

Kingston were very good with the refund though. All done within a couple of days.


Mr Pointy

13,443 posts

190 months

Friday 23rd November 2018
quotequote all
Derek Smith said:
Mr Pointy said:
hat brand was the SSD? Samsung are very reliable (usually)
It was a Kingston, UV400 - 480 GB. The reviews were pretty good and it was supposed to be very reliable too.

Kingston were very good with the refund though. All done within a couple of days.
Paging Derek shout

Amazon have Samsung 860 Evo SSDs in the BF sale. The 1TB is a bit less than usual but the 2TB does seem a real bargain (if you go by what Camel cubed says).

https://www.amazon.co.uk/apb/page/?handlerName=Oct...

TonyRPH

13,550 posts

199 months

Friday 23rd November 2018
quotequote all
Mr Pointy said:
Derek Smith said:
Mr Pointy said:
hat brand was the SSD? Samsung are very reliable (usually)
It was a Kingston, UV400 - 480 GB. The reviews were pretty good and it was supposed to be very reliable too.

Kingston were very good with the refund though. All done within a couple of days.
Paging Derek shout

<snip>
Quite possibly the page file as you say - especially if RAM is on the low side or heavily utilised.

I have a normal HDD in my desktop PC for random bits of storage (that I don't need to keep on the network) and I use that for the pagefile.


Penelope Stopit

11,209 posts

140 months

Friday 23rd November 2018
quotequote all
Mr Pointy said:
aging Derek shout

Amazon have Samsung 860 Evo SSDs in the BF sale. The 1TB is a bit less than usual but the 2TB does seem a real bargain (if you go by what Camel cubed says).

https://www.amazon.co.uk/apb/page/?handlerName=Oct...
I haven't any idea what the battery is for
Will somebody kindly educate me