Internet switch - this one ok for my needs?
Discussion
We're currently getting the house renovated so i'm getting cat6 cables run around the place to the cupboard under the stairs to make the best of our recently upgraded BT superfast broadband (currently get about 32 mbs).
Uses will typically be for:
- Smart TVs/roku boxes
- Working from home
- Ubiquiti WAP to get better wifi coverage around the house
- No gaming but 2 young boys so won't be long i suppose!
- Possibly a NAS to be added soon
The sparky is moving my BT master socket to under the stairs (currently it's right in the middle of the kitchen wall!) and installing the data cables. My plan is to buy the following 'unmanaged' network switch:
https://www.amazon.co.uk/NETGEAR-Ethernet-Unmanage...
Current plans I have 12 cables i'd want to plug in so figure I should buy a swutch with a bit more capacity. I'm no expert but figured out i need a POE one to power the ubiquiti WAP without a dedicated power supply.
Will this do the job? Is it just a case of plug this into the BT router and all the data cables into the switch or am i missing something?
Uses will typically be for:
- Smart TVs/roku boxes
- Working from home
- Ubiquiti WAP to get better wifi coverage around the house
- No gaming but 2 young boys so won't be long i suppose!
- Possibly a NAS to be added soon
The sparky is moving my BT master socket to under the stairs (currently it's right in the middle of the kitchen wall!) and installing the data cables. My plan is to buy the following 'unmanaged' network switch:
https://www.amazon.co.uk/NETGEAR-Ethernet-Unmanage...
Current plans I have 12 cables i'd want to plug in so figure I should buy a swutch with a bit more capacity. I'm no expert but figured out i need a POE one to power the ubiquiti WAP without a dedicated power supply.
Will this do the job? Is it just a case of plug this into the BT router and all the data cables into the switch or am i missing something?
Mr Pointy said:
You're paying a substantial overhead for a PoE switch when you're only using one port that needs power. Are you dead set against using a PoE injector? Four spare ports isn't much either. Any plans for stuff like CCTV?
Excuse my ignorance but what is a PoE injector? Any particular recommendation on a good one? No great plans for CCTV or over teching the house in the future tbh.A PoE injector would work fine for a single connection as said, but it's ugly and will clutter up the cupboard, particularly if you then decide that actually you want to add a few remote cameras or similar. For something which is going to future-proof you, the switch you've linked to is pretty good and whilst you're more than doubling the price by speccing PoE in the grand scheme of things it's not a huge amount of money for guaranteed future flexibility.
If it were me though I'd want more than 4 spare ports so for not a lot more money, I'd probably go for this one https://www.amazon.co.uk/Linksys-LGS124P-EU-Busine... as it'll give you a bit more scope for adding more kit.
If it were me though I'd want more than 4 spare ports so for not a lot more money, I'd probably go for this one https://www.amazon.co.uk/Linksys-LGS124P-EU-Busine... as it'll give you a bit more scope for adding more kit.
ramblo93 said:
Mr Pointy said:
You're paying a substantial overhead for a PoE switch when you're only using one port that needs power. Are you dead set against using a PoE injector? Four spare ports isn't much either. Any plans for stuff like CCTV?
Excuse my ignorance but what is a PoE injector? Any particular recommendation on a good one? No great plans for CCTV or over teching the house in the future tbh.https://www.amazon.co.uk/Ubiquiti-Power-Adaptor-80...
Note you need to check it's the right one for your WAP model & it needs a power connection of course. The switch you linked to is ok, but overkill. The Linksys one is less overkill & has more expansion space.
16 port Gb switch £54
https://www.amazon.co.uk/TP-LINK-TL-SG1016D-16-Por...
Then use a PoE injector where required, and as stated, you can make sure you get ones that work with each device. Often IPCams come with their own PoE injector.
You can even go managed for £85. Though I wouldn't. It's one more thing that can crash. I'm not a pessimist, but an unmanaged switch rarely, if ever crashes and you really don't need a managed switch with your needs. Its just another layer (pun!) of unescessary complication.
https://www.amazon.co.uk/Zyxel-24-Port-Gigabit-Man...
https://www.amazon.co.uk/TP-LINK-TL-SG1016D-16-Por...
Then use a PoE injector where required, and as stated, you can make sure you get ones that work with each device. Often IPCams come with their own PoE injector.
You can even go managed for £85. Though I wouldn't. It's one more thing that can crash. I'm not a pessimist, but an unmanaged switch rarely, if ever crashes and you really don't need a managed switch with your needs. Its just another layer (pun!) of unescessary complication.
https://www.amazon.co.uk/Zyxel-24-Port-Gigabit-Man...
ooo000ooo said:
My Ubiquity came with a poe injector, IIRC they didn't use the normal voltage from a poe switch - 24V instead of 48V? that may have changed?
Different Ubiquit AP's use different standards. I have three models that use three different standards 802.3af, 802.3at and passive 24v!This helps https://help.ubnt.com/hc/en-us/articles/1150002630...
Just make sure the switch you buy supplies PoE to the same standard as the AP's that you buy.
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff


