Help - Identify Micro USB socket component.
Help - Identify Micro USB socket component.
Author
Discussion

Pedro Raynard

Original Poster:

109 posts

139 months

Monday 3rd December 2018
quotequote all
Hi,

My JBL Charge speaker, Micro USB charge socket has given up the ghost and won't charge. I have established a broken connection between the Micro USB and PCB.

Looking at the internet I can get a Micro USB breakout board, which has the Micro USB soldered to the PCB meaning it's just a matter of soldering the 3 connecting wires. However, on the board I have removed there are two components which appear to be in series with the Ground & Vcc. Pins 1 & 5. See photo, below components RS1 and RS2 with 0 printed on them.

Any ideas what they are?

Pedro.


GrumpyTwig

3,354 posts

188 months

Monday 3rd December 2018
quotequote all
I'll take a punt and say they're just bridges i.e 0 ohm resistors.

GrumpyTwig

3,354 posts

188 months

anonymous-user

85 months

Monday 3rd December 2018
quotequote all
Any pics of your project would be grand when you are doing it. My Micro USB on my JBL charge is on its way out - only charges with once specific lead now, when you wiggle it.

ARHarh

4,892 posts

138 months

Tuesday 4th December 2018
quotequote all
GrumpyTwig said:
I'll take a punt and say they're just bridges i.e 0 ohm resistors.
Correct, they are zero ohm resisters or links.

Pedro Raynard

Original Poster:

109 posts

139 months

Tuesday 4th December 2018
quotequote all
LOL - thanks for responses. They say there's no such thing as a daft question but at the moment I'm feeling a but dim. What happened to the good old linking wire.


RogerDodger said:
Any pics of your project would be grand when you are doing it. My Micro USB on my JBL charge is on its way out - only charges with once specific lead now, when you wiggle it.
Will do, give me a few days to get sorted. I'm looking at replacing with something like this. Just need to ensure the PCB can be cut down to size to fit in the case slots.



Pedro