Raspberry Pi Hol
Discussion
Anyone using this? (Pi Hole.... that is)
Thinking of adding one to my ubiquiti setup to block ads system wide so I don’t have to run ad blockers on all devices. TVs obviously can’t run an adblocker and it’s a bit annoying.
I think I can run ad blocking via my USG But it’s a bit faffy to install.
Any tips?
Rich
Thinking of adding one to my ubiquiti setup to block ads system wide so I don’t have to run ad blockers on all devices. TVs obviously can’t run an adblocker and it’s a bit annoying.
I think I can run ad blocking via my USG But it’s a bit faffy to install.
Any tips?
Rich
Edited by thebraketester on Wednesday 5th December 00:56
I set one up last week easy setup and it seems to be doing the job OK. I did it mainly for the DHCP server as my router was struggling with the amount of things I have hanging off the wifi. The add blocking is nice and does make a difference to web browsing. If you have a pi doing nothing it is worth doing.
I run Pi-Hole as a VM and also tunnel the DNS lookups over HTTPs to CloudFlare. Nice to remove most adverts without having to resort to browser extensions.
There's a good guide here:
https://scotthelme.co.uk/securing-dns-across-all-o...
There's a good guide here:
https://scotthelme.co.uk/securing-dns-across-all-o...
Dave. said:
I did at my previous house (virgin media) and it was bliss!
With BT now, and you can't change the DNS server on their homehubs.
Keep meaning to buy my own router but never got round to it.
You could change the DNS server on your clients to point to the RPi running PiHole (after they've booted and DHCP'd)With BT now, and you can't change the DNS server on their homehubs.
Keep meaning to buy my own router but never got round to it.
eg for Windows, either through the control panel GUI, or with a scheduled "netsh ip set dns=..." batch file command at boot.
It works fine for me on an RPi 2B. It's particularly good for unrooted smartphones/tablets where it's not always easy to install ad blockers.
Nimby said:
You could change the DNS server on your clients to point to the RPi running PiHole (after they've booted and DHCP'd)
eg for Windows, either through the control panel GUI, or with a scheduled "netsh ip set dns=..." batch file command at boot.
It works fine for me on an RPi 2B. It's particularly good for unrooted smartphones/tablets where it's not always easy to install ad blockers.
I have plusnet which uses a bt homehub 5. you cant change the dns on it, which is why pihole has a dhcp server. just disable the dhcp server on the router and setup the dhcp on pihole. https://discourse.pi-hole.net/t/how-do-i-use-pi-ho...eg for Windows, either through the control panel GUI, or with a scheduled "netsh ip set dns=..." batch file command at boot.
It works fine for me on an RPi 2B. It's particularly good for unrooted smartphones/tablets where it's not always easy to install ad blockers.
Harpoon said:
I run Pi-Hole as a VM and also tunnel the DNS lookups over HTTPs to CloudFlare. Nice to remove most adverts without having to resort to browser extensions.
There's a good guide here:
https://scotthelme.co.uk/securing-dns-across-all-o...
Does pi hole block YouTube in video ads? As that’s the main reason I would want it. There's a good guide here:
https://scotthelme.co.uk/securing-dns-across-all-o...
ARHarh said:
Nimby said:
You could change the DNS server on your clients to point to the RPi running PiHole (after they've booted and DHCP'd)
eg for Windows, either through the control panel GUI, or with a scheduled "netsh ip set dns=..." batch file command at boot.
It works fine for me on an RPi 2B. It's particularly good for unrooted smartphones/tablets where it's not always easy to install ad blockers.
I have plusnet which uses a bt homehub 5. you cant change the dns on it, which is why pihole has a dhcp server. just disable the dhcp server on the router and setup the dhcp on pihole. https://discourse.pi-hole.net/t/how-do-i-use-pi-ho...eg for Windows, either through the control panel GUI, or with a scheduled "netsh ip set dns=..." batch file command at boot.
It works fine for me on an RPi 2B. It's particularly good for unrooted smartphones/tablets where it's not always easy to install ad blockers.
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff


