Help installing new gfx card
Author
Discussion

red_slr

Original Poster:

20,984 posts

220 months

Friday 7th December 2018
quotequote all
I have bought a new card... might be being dumb here...

First swapped the card and booted up. Nothing no input detected.

So put old card back in and ok. Put in cd and installed the sw package. Swapped out cards again and nothing still.

Gone from 970 to 1070ti if that helps !

anonymous-user

85 months

Friday 7th December 2018
quotequote all
Which output from the old card are you using and which from the new card (HDMI, VGA, DP, DVI)?

You may need to go back to basics - i.e. DVI/VGA when you first boot.

When I switch graphic cards I do it in this order.

1) Uninstall current graphics drivers - completely. Delete the card from Device manager. When asked to reboot, don't. Shut down instead.
2) Install new card.
3) Power up and install new drivers.

I'm guessing you might not have done step 1? including deleting the device from device manager.

FYI - You won't need the new software / drivers for the new card to boot in VGA/800x600. It should boot in VGA/800x600 with no drivers. Then you can install the drivers.

iMitchy

12 posts

103 months

Friday 7th December 2018
quotequote all
As above - are you using HDMI or Display port when booting with the new card? You should use VGA which uses an analog signal before installing drivers.

red_slr

Original Poster:

20,984 posts

220 months

Friday 7th December 2018
quotequote all
I don't have anything with DVI in....

I was using HDMI on the 970 and just connected the same HDMI on the 1070.

I will try uninstalling the old card...

MagicalTrevor

6,481 posts

260 months

Friday 7th December 2018
quotequote all
It should work with HDMI, you don't need to use VGA or anything like that. If you can reinstall your old card, deinstall the software (I realise it's the same as the new card) and then start 'Device Manager', find 'Display Adapters' and then make sure the Nvidia Geforce 970 has gone. If it's not then you might need to right click and deinstall it.

It should fall back to being a basic GPU and at that point you can install the new card.

None of this should really be necessary but it's a belts and braces approach.

red_slr

Original Poster:

20,984 posts

220 months

Friday 7th December 2018
quotequote all
Deinstall the Nvidia software?

red_slr

Original Poster:

20,984 posts

220 months

Friday 7th December 2018
quotequote all
OK so I am now up and running again thanks for that. I just removed the 970 from the device manager and then it worked straight away. Phew! Thanks for that!!! biggrin

MagicalTrevor

6,481 posts

260 months

Friday 7th December 2018
quotequote all
You're welcome

red_slr

Original Poster:

20,984 posts

220 months

Friday 7th December 2018
quotequote all
So a quick test and all is not well only seeing 17fps in one game and another has good fps boost (from 30 to over 50) but everything is blurry... hmmm...

red_slr

Original Poster:

20,984 posts

220 months

Friday 7th December 2018
quotequote all
Ok sorted one of the issues (blurry) looks like my old settings were causing a problem.
Other game low FPS no idea!!! I think the FPS feels much better but not anywhere near 17fps. Weird!

red_slr

Original Poster:

20,984 posts

220 months

Friday 7th December 2018
quotequote all
Panic over the performance tab on beamng basically crashes the FPS. If you press ctrl f you get your true fps which for me is 80.

Right now to set up my vive again.. smile

MagicalTrevor

6,481 posts

260 months

Friday 7th December 2018
quotequote all
It's worth using Geforce Experience to set the optimal graphics settings for your games. You'll have to tweak them for VR but it's a good start