Alternative to SketchUp for slower computers?
Discussion
Hi all, I have a Packard Bell iMedia S3810. It has intel graphics which are not compatible with sketchup. Can anyone recommend a basic 2D/3D dimensioned drawing programme which will work on my antiquated machine? I don't need anything as complicated as a CAD programme, I just want to lay out some wooden frames for furniture, DIY projects, etc.
Many thanks!
Many thanks!
Might be too basic but perhaps worth a look.
https://www.tinkercad.com
Are you using the installed version of Sketchup? The latest version is online now.
https://www.tinkercad.com
Are you using the installed version of Sketchup? The latest version is online now.
Looks like your PC is pretty low spec (is that a first generation i3?) and has a low wattage power supply. You could try a graphics card with low power requirements like a Quadro K600. This should work with Sketchup and would only cost you £20.
https://www.ebay.co.uk/itm/PNY-VCQK600ATX-T-nVIDIA...
f:0
https://www.ebay.co.uk/itm/PNY-VCQK600ATX-T-nVIDIA...
f:0I have tried Sketchup and it wouldn't work at all, the issue is with OpenGL I think, my on-board graphics don't support OpenGL well enough / at-all. I like the idea of adding a cheap graphics card, do I just open the case, plug it in, and turn the computer on again, or would I need to reinstall Windows etc?
Yes just stick it in the slot and connect your monitor to it. Most cards would need a power cable connected to it from your power supply, but the one I linked to doesn't, so you can just fit it in. I doubt the standard power supply your computer came with would allow for anything more powerful.
That card has a DVI port and a Display Port connectors, the Display Port is the one that looks a lot like an HDMI port. You can use either port on the card to connect to your monitor. I don't know what monitor or leads you are currently using, so just be mindful that if you are using a monitor with only an HDMI or VGA connection, you would need need a DVI or Display Port to HDMI adapter like the one pictured below. They are only a couple of quid on ebay.

Windows might download and install the drivers for you, but I would download them directly from Nvidia before you install the card. Once you have fitted the card and booted up, Windows will probably install a basic driver, then you can install the Nvidia driver yourself.
When you open the case up, try not to shuffle on the carpet and create static electricity
You can discharge any electrical build up in you by touching some copper pipework on radiators or under the sink
Sorry if I'm teaching granny to suck eggs, but from your post I assumed you didnt know any of this stuff.
Do you have enough RAM? Sketchup requires 4GB minimum. If your PC is an early i3 it probably still has plenty of life in it for light work, however it would run a lot better with 4GB of RAM and a fresh Windows installation on an SSD.
That card has a DVI port and a Display Port connectors, the Display Port is the one that looks a lot like an HDMI port. You can use either port on the card to connect to your monitor. I don't know what monitor or leads you are currently using, so just be mindful that if you are using a monitor with only an HDMI or VGA connection, you would need need a DVI or Display Port to HDMI adapter like the one pictured below. They are only a couple of quid on ebay.
Windows might download and install the drivers for you, but I would download them directly from Nvidia before you install the card. Once you have fitted the card and booted up, Windows will probably install a basic driver, then you can install the Nvidia driver yourself.
When you open the case up, try not to shuffle on the carpet and create static electricity
You can discharge any electrical build up in you by touching some copper pipework on radiators or under the sink
Sorry if I'm teaching granny to suck eggs, but from your post I assumed you didnt know any of this stuff.Do you have enough RAM? Sketchup requires 4GB minimum. If your PC is an early i3 it probably still has plenty of life in it for light work, however it would run a lot better with 4GB of RAM and a fresh Windows installation on an SSD.
It might be worth seeing if you can fit a more powerful card. If you open the case and look at the power supply, if it says 300W or more and has a spare 6 pin block connector, you could probably fit something better.
However, the Quadro K600 supports Open GL up to version 4.4, so it should do the job even if it is not much of an upgrade over the Intel built in graphics.
However, the Quadro K600 supports Open GL up to version 4.4, so it should do the job even if it is not much of an upgrade over the Intel built in graphics.
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff


