Use CAT6 to extend router to BT socket cable?
Use CAT6 to extend router to BT socket cable?
Author
Discussion

Andeh1

Original Poster:

7,623 posts

237 months

Friday 11th January 2019
quotequote all
I want to move the router to a more central location in the house, as opposed to next to the bt socket on the edge of the house.

I have a cat6 with rj45 on either end of it connecting router to my network switch.

Can anyone recommend what sort of adapter I need on either end of it? To connect a very new BT wall socket (without seperate microfilter) to a cat6 cable?

Thanks

Ynox

1,755 posts

210 months

Saturday 12th January 2019
quotequote all
I've done similar. It works well.

BT socket (with filtered faceplate) -> RJ11 port -> RJ45 port into the port next to it and then up into my airing cupboard where I have another RJ45 to RJ11 cable to connect my router to the cabling.

If you have a microfilter in use then the port on these is normally an RJ11, so an RJ11 to RJ45 cable should work. Otherwise you'd need a BT phone connector to RJ45. Easy to do though.

Brother D

4,452 posts

207 months

Saturday 12th January 2019
quotequote all
If you are talking about an ADSL router or Fiber? ADSL will need a telephone extension lead from the socket to the router.

If it's fiber with a seperate Openreach modem, then yes you can leave the openreach modem and extend using the longer Cat 6.

Just as an FYI there are flat Cat 6 cables available. https://www.amazon.co.uk/kenable-Ethernet-Patch-Pr...

What problem are you trying to solve?