Connecting 2 ends of RGB wire

[Rollin]

Is there a special connector for joining 2 ends of RGB wire like this?

[megaphone]

You have two bare ends? Solder them and heat shrink if you have some. Or you could just use terminal block. Where will the joint be located?

[Rollin]

2 bare ends. I wanted something that I could unplug if needed.

[Zirconia]

What is it carrying?
Phono connectors are one option but D types and other similar connectors with a suitable shell and screw up assembly are available depending on what it is used for and cable diameter.

[megaphone]

Rollin said:

2 bare ends. I wanted something that I could unplug if needed.

Use Phoenix connectors, you can get male and female 4 way versions, screw terminals.

eg https://uk.rs-online.com/web/p/non-fused-terminal-...

[megaphone]

Are the cables individually screened? Or just single core?

[Rollin]

Looking for a bare plug like this, but without wires attached, so I can solder to my bare wire.

[Zirconia]

If you don't have access to RS, CPC Farnel are none to bad if you know the connector you are looking for.
https://www.easyflip.co.uk/CPC_Catalogue/

[droopsnoot]

These seem similar, but not solder connectors: https://www.amazon.co.uk/Lights-Extension-Connecto...

[Mr Pointy]

Chocolate block will do just fine.

[megaphone]

Mr Pointy said:

Chocolate block will do just fine.

He wants to unplug it.

[Mr Pointy]

megaphone said:

Mr Pointy said:

Chocolate block will do just fine.

He wants to unplug it.

Well he wants to disconnect it if needed so choccy block will work. I can't find a rewireable RGBS female lighting connector but he could bodge something like this together by soldering on to the white connector:
https://www.amazon.co.uk/WOWLED-Connector-Adapter-...

Hopefully the male joiners are included.

[Rollin]

Mr Pointy said:

megaphone said:

Mr Pointy said:

Chocolate block will do just fine.

He wants to unplug it.

Well he wants to disconnect it if needed so choccy block will work. I can't find a rewireable RGBS female lighting connector but he could bodge something like this together by soldering on to the white connector:
https://www.amazon.co.uk/WOWLED-Connector-Adapter-...

Hopefully the male joiners are included.

Yep that looks like best option. Thanks