Powerline via 2x consumer unit
Discussion
miniman said:
Would like WiFi on my deck. There is power, that goes:
House consumer unit -> deck consumer unit -> sockets via MCB
Will powerline work like this or does it have to be the same ring?
I have similar setup and my powerline stuff is rock solid.House consumer unit -> deck consumer unit -> sockets via MCB
Will powerline work like this or does it have to be the same ring?
TP-Link AV1350:
https://www.amazon.co.uk/gp/product/B07349P1TX/ref...
I was always sceptical about Power Line Adaptors, particularly their ability to get through consumer units, but have just invested in some Devolo dLan 500 and 1200+ adaptors to get to a barn about 50 metres away from the router going via at least three consumer units. While the resultant data rate is only about 25Mbps for the furthest PLA, it's perfectly adequate for a pair of CCTV cameras and surfing.
Lily the Pink said:
I was always sceptical about Power Line Adaptors, particularly their ability to get through consumer units, but have just invested in some Devolo dLan 500 and 1200+ adaptors to get to a barn about 50 metres away from the router going via at least three consumer units. While the resultant data rate is only about 25Mbps for the furthest PLA, it's perfectly adequate for a pair of CCTV cameras and surfing.
Hope they last better than mine. I had two sets of these one after the other. First set failed after 9 months and the second after about 11. Rock solid and fast until one day they lose sync and nothing will get it back. Second time was after a momentary power cut so maybe they don't have much spike protection, don't recall anything coinciding with the first failure.Amazon replaced the first time and refunded the second with pretty much no questions.
Have now moved to mesh since it was added to my router's firmware in an update.
Edited by stemll on Friday 15th May 14:25
As said will work across rings. I set up a devolo magic powerline this week. The node in the garage 30m from the house is showing a healthy speed, not as quick as in the house on the main circuit but decently strong. I did try a tenda mesh but found we didnt really have plugs in convenient places (with somewhere to stand the node) so the pass through facility of the devolo is much easier to acvomodate
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff



