BT Home Hub replacement for QoS
BT Home Hub replacement for QoS
Author
Discussion

miniman

Original Poster:

30,161 posts

292 months

Wednesday 27th May 2020
quotequote all
Not sure if "QoS" is the correct term - I think it is.

Essentially, I want to run an additional WiFi SSID, that only I have the password for, which has priority over other usage of the bandwidth. In other words, as I work from home more, I want to prevent XBox / Netflix activity knackering me!

Any thoughts on what I need? I understand that the BT Home Hub can't do this - my historic choice would have been some sort of Draytek Vigor but haven't looked at this area for many years.

smile

TEKNOPUG

20,495 posts

235 months

Wednesday 27th May 2020
quotequote all
Any decent third party router should have the ability to place bandwidth limits on any device connected to it.

I have an old ASUS DSL-AC68U and you can set limits, connection times (devices will only connect to internet at selected times), remotely terminate connections, QoS, usage monitor etc.

Mr Pointy

13,419 posts

189 months

Wednesday 27th May 2020
quotequote all
The Draytek Knowledgebase is worth a look & has this on the QoS features:

https://www.draytek.co.uk/information/solutions/qu...

It looks as if the question is how to allocate users to the variuos classes (high, medium & low). It would take a bit of digging into the configuration screens but at first glance I'm not sure if you can allocate a particualr SSID to a class (you to class 1, everyone else to class 2). You can do it by IP but that might not be too easy.

Scooobydont

410 posts

224 months

Wednesday 27th May 2020
quotequote all
Draytek will do it, you VLAN off your new SSID on to a different LAN range and then use QoS to prioritise the VLAN over the rest of the LAN ranges. You can decide how much of the bandwidth you want to use.

PF62

4,065 posts

203 months

Wednesday 27th May 2020
quotequote all
miniman said:
In other words, as I work from home more, I want to prevent XBox / Netflix activity knackering me!
Is that really an issue with a normal fibre connection?


Dashnine

1,715 posts

80 months

Wednesday 27th May 2020
quotequote all
I doubt using a separate WiFi Network will solve your problem as the WIFi will be faster than your broadband, Your issue is with the broadband bandwidth being used up by the gamers / viewers.

miniman

Original Poster:

30,161 posts

292 months

Wednesday 27th May 2020
quotequote all
Dashnine said:
I doubt using a separate WiFi Network will solve your problem as the WIFi will be faster than your broadband, Your issue is with the broadband bandwidth being used up by the gamers / viewers.
I guess that’s what I’m looking for - a way to limit a specific SSID to a capped amount - eg 10mb

Mr Pointy

13,419 posts

189 months

Wednesday 27th May 2020
quotequote all
miniman said:
Dashnine said:
I doubt using a separate WiFi Network will solve your problem as the WIFi will be faster than your broadband, Your issue is with the broadband bandwidth being used up by the gamers / viewers.
I guess that’s what I’m looking for - a way to limit a specific SSID to a capped amount - eg 10mb
I'm pretty sure you can do that on a Draytek - you allocate a % of the bandwidth to each class. If you can connect at 5GHz then you can force connections to split between 2.4 & 5GHz & use Airtime Fairness to give yourself more connection time:

https://www.draytek.co.uk/information/our-technolo...

Bikerjon

2,211 posts

191 months

Wednesday 27th May 2020
quotequote all
You can also do this on a Draytek by enabling bandwidth limits for a selected IP range or addresses. I think this is an easier option than the QOS implementation - which is slightly tricky to setup.