CAD (Fusion 360) Training

[Scabutz]

I'm using Fusion 360 to do designs for 3d printing. I don't have a CAD background and I'm getting frustrated with not being able to achieve what I want. I have a Pluralsight account and did a course in there but it wasn't very good.

Any recommendations for online training to help please.

[Smiler.]

Have you signed up to the Autodesk forums?

https://forums.autodesk.com/t5/fusion-360/ct-p/123...



Also, look at Linkedin training (used to be Lynda).
You get a month free, pay monthly & stop paying when you want.

https://www.linkedin.com/learning/topics/fusion-36...

[paulrockliffe]

There's loads of great tutorials on YouTube, step by step walk throughs etc

[Scabutz]

Smiler. said:

Have you signed up to the Autodesk forums?

https://forums.autodesk.com/t5/fusion-360/ct-p/123...



Also, look at Linkedin training (used to be Lynda).
You get a month free, pay monthly & stop paying when you want.

https://www.linkedin.com/learning/topics/fusion-36...

Thanks, had forgotten about LinkedIn, will give those courses a try.

I have signed up to the forum also. Will use that when I get really stuck.

[Scabutz]

paulrockliffe said:

There's loads of great tutorials on YouTube, step by step walk throughs etc

Thanks. I found one chap who does lots of videos. His stuff is really good when you want to do a specific thing. I think I need a bit more basic/intermediate training.

[16v stretch]

I found some great intro tutorials when searching for things like raspberry pi case tutorials or arduino case tutorials.

Those basic maker style projects generally don't assume any prior experience. You can then search for how to do more advanced stuff as and when you need it.

Good luck!

[CubanPete]

Not sure on Fusion 360, but this site forum has lots of help for the software I use at work.

https://www.eng-tips.com/