VCR Recording problem
Discussion
Check what channel / frequency is tuned to, (the RF output from the VCR to the TV) if that is too close to an existing signal you can get interference, even if you are using SCART cable. Have a tweak of the adjustment screw on the back & see if that cures it...
Hope that helps,
Chris
Hope that helps,
Chris
chris.mapey said:
Check what channel / frequency is tuned to, (the RF output from the VCR to the TV) if that is too close to an existing signal you can get interference, even if you are using SCART cable. Have a tweak of the adjustment screw on the back & see if that cures it...
Hope that helps,
Chris
How do I do that?
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff


