24v DC Relay wanted

[worsy]

Hi all, am after a 24v high/low switchable dc-dc solid state single chanbel relay. I have this one

https://amzn.eu/d/hN7HSbu

Which works great but is mechanical and the input is flappy so will eventually wear it out.

I bought this one

https://amzn.eu/d/6OroUX5

But although it says sold state the one i received was mechanical (looked different to be fair).

Amp requirements are low, less than 1a.

Can anyone recommend anything?

[.:ian:.]

Sounds like a mosfet would be what you are looking for. I sure chatgpt or another ai can give you a circuit based on the supply voltage and the switching voltage, ie you have a 24v supply, but what voltage do you want to trigger the turning on of the mosfet.

[worsy]

.:ian:. said:

Sounds like a mosfet would be what you are looking for. I sure chatgpt or another ai can give you a circuit based on the supply voltage and the switching voltage, ie you have a 24v supply, but what voltage do you want to trigger the turning on of the mosfet.

Between 5v and 24v. Basically I'm taking an input from a open gate indicator(OGI) to tell a Remootio device that it is open. The problem I have is that as the gate opens the OGI flashes asnd therefore opens and closes the relay multiple times. It works fine but I worry that it will prematurely wear out the rlay. A SSR version would therefore be more relaible.

If I can't find one I'll just replace it periodically at 4 or 5 quid a go. If it were to fail the only issue I'd have is not being able to remotely know if the gate was open or closed.

[worsy]

https://uk.rs-online.com/web/p/solid-state-relays/...

Looks like the jobby for me.

[StescoG66]

Also check out https://www.12voltplanet.co.uk/

Edited by StescoG66 on Sunday 4th January 09:38