Underwater CCTV
Author
Discussion

Popolou

Original Poster:

1,189 posts

229 months

Yesterday (17:38)
quotequote all
Does anyone have any experience with or could recommend a CCTV ip cam that works at some pretty serious depths? Got a water well that is pushing circa 150m with a suspected collapsed pipe. Managed to rig up a standard CCTV POE camera down to 65m before hitting a 15m column of water at which point it imploded. Or is this approaching specialist territory?

Cheers

JoshSm

3,044 posts

59 months

Yesterday (17:43)
quotequote all
That sounds a bit specialist, and surely you're going to have to get someone who knows what they're doing to fix it who'll probably have the right gear anyway?

Popolou

Original Poster:

1,189 posts

229 months

Yesterday (17:49)
quotequote all
Apparently not, and their suggestion is to push the existing pump to let it fall to the bottom and replace but if there is any pipe in there it will kill the well. Too expensive to do it blind and hope for the best unfortunately.

normalbloke

8,425 posts

241 months

Yesterday (18:18)
quotequote all
Speak to a drainage survey company, or hire the type of kit they use.

Popolou

Original Poster:

1,189 posts

229 months

Yesterday (18:32)
quotequote all
Good suggestion, seems their fibreoptic kit can go +150m which is key but no idea on pressures and depths. Will give a few a call. Cheers.

JoshSm

3,044 posts

59 months

Yesterday (18:37)
quotequote all
Thing is if you're looking at maybe >80 metres of water the pressure is going to be pretty serious - 8bar plus - more than most drain inspection cameras or standard dive cameras would take. You're into secondary dive camera housings and that's getting expensive. Plus none of them are tethered IP cameras anyway.

If you really want an IP camera you could get a cheap one and encapsulate the whole thing in resin or a waterclear silicone. And seal the cable too.

Plus some decent lighting to go with it.

Popolou

Original Poster:

1,189 posts

229 months

Yesterday (18:45)
quotequote all
JoshSm said:
Thing is if you're looking at maybe >80 metres of water the pressure is going to be pretty serious - 8bar plus - more than most drain inspection cameras or standard dive cameras would take. You're into secondary dive camera housings and that's getting expensive. Plus none of them are tethered IP cameras anyway.

If you really want an IP camera you could get a cheap one and encapsulate the whole thing in resin or a waterclear silicone. And seal the cable too.

Plus some decent lighting to go with it.
Cheers, yes that also came up in discussions and exploring that too. Found a few in the 2-300 quid mark which seem to be the right dimensions for a cheap IP cam. And this is all assuming i won't need more than the 100m IP will works to. More i think about it the more that i feel this is going to lead me to a specialist outfit with the right kit.

biggiles

2,032 posts

247 months

Yesterday (21:22)
quotequote all
Popolou said:
Does anyone have any experience with or could recommend a CCTV ip cam that works at some pretty serious depths? Got a water well that is pushing circa 150m with a suspected collapsed pipe. Managed to rig up a standard CCTV POE camera down to 65m before hitting a 15m column of water at which point it imploded. Or is this approaching specialist territory?

Cheers
Out of interest, if the water level is hit at 50m (65m less 15m), why do you need to go down to 150m? Does the level vary significantly throughout the seasons?

150m is pretty deep, definitely into specialist kit. But having had some borehole experience, I doubt it will be cheap.