Temporary Solution to connect Hive with only EE Dongle
Temporary Solution to connect Hive with only EE Dongle
Author
Discussion

omniflow

Original Poster:

3,879 posts

182 months

We have recently moved house and, whilst I have ordered full fibre broadband, it requires Openreach to dig up some pavement meaning a current ETA of 11th Feb 2027. I have tried to expedite this, but no luck so far. I have ordered my broadband from BT, which these days is actually EE (from what I can gather).

I have an EE supplied dongle (for some reason I've actually got 3 of these) and it works well enough, however the Hive system I've chosen needs an ethernet connection for the hub.

The house is 3 floors. The thermostat is on the top floor along with the hot water tank, motorised valves etc and the boiler and programmer are on the middle floor.

When we finally get broadband, I plan to implement a mesh system but using components that I buy rather than rent from BT. I have no idea what router I'll end up using as the main one, maybe the one BT / EE supply, but I'd be equally happy to buy a complete mesh system from another source.

Any thoughts on the best way to get the Hive up and running now? Whilst I'd prefer for any money spent to be part of a longer term plan, if I need to spend a few quid on a dead end solution then I'll consider it.


Harpoon

2,554 posts

245 months

An Ethernet > Wireless bridge will give you a temporary fix for around £35 eg

https://www.amazon.co.uk/BrosTrend-Ethernet-2-WiFi...

carguy45

1,259 posts

195 months

Failing that, there are assorted 4G/5G routers out there that have ethernet ports but use the SIM for connectivity. I manage IT for a Civil Engineering consultancy and for example, we have used Cradlepoint routers in the past for the likes of site offices and other locations where short term but reliable/fast internet is needed and they can't justify or accommodate a permanent full broadband connection. They've worked out very well for us.