Discussion
Hi can anyone give me some pointers on how to look at the config and change it on a pix fire wall.
I have a red hat box thats sitting behind one. I want to use Mutt to send e-mails with an attatchment every 15 mins.
mutt is installed but no mail appears at the other end. ( there must be a log file somewhere!!!) I expect its due to everything being locked right down
as i cant ping, telnet, telnet to port 25 traceroute or anything.... dns lookup is ok though...
help
G
I have a red hat box thats sitting behind one. I want to use Mutt to send e-mails with an attatchment every 15 mins.
mutt is installed but no mail appears at the other end. ( there must be a log file somewhere!!!) I expect its due to everything being locked right down
as i cant ping, telnet, telnet to port 25 traceroute or anything.... dns lookup is ok though...
help
G
You can use the horrid Web Interface (if enabled and if permitted via rule)
You can use SSH to access it (ssh pix@ip IF you're IP is allowed SSH access)
If you have local access to it, simply plug a console cable into it (serial port on pc, HyperTerm!)
then once you have HyperTerm Connected, login with the password
en
then enter the enable password (maybe the same)
show run
and you will be greeted with the running config for the PiX.
Enjoy.
J
You can use SSH to access it (ssh pix@ip IF you're IP is allowed SSH access)
If you have local access to it, simply plug a console cable into it (serial port on pc, HyperTerm!)
then once you have HyperTerm Connected, login with the password
then type said:
en
then enter the enable password (maybe the same)
then once enabled type said:
show run
and you will be greeted with the running config for the PiX.
Enjoy.
J
Graham said:
thats what im expecting but i get connection refused. if i do it from my pc here on my lan ( separate from the server) it works fine..
i get
Trying 197.73.73.217
telnet: connect to address 197.73.73.217: Connection refused
It cant be getting out can it ?
That server doesn't allow connection on port 25 from my NTL connection at home. IIRC BT block port 25 so if you're not connected via BT you ain't coming in. Has your ISP got a smart relay host you can point at?i get
Trying 197.73.73.217
telnet: connect to address 197.73.73.217: Connection refused
It cant be getting out can it ?
Yeah trouble is the domain doesnt actually exist.... this mail server is just setup to mail an attatchement to a supplier every 15 minutes from the job system, so its not actually their main mail server for that they have an exchange server which i think then relays to their ISP...
I assume what im going to have to try now is to configure sendmail to relay to either the exchange server or the isp's server and configure them to let it in... which is starting to sound like a lot of fun....
mail servers aint really my bag, and im on the edges of my knowledge !!!! arghhhh
dont you just love it when they drop, " can you just get it to mail that file " at the end of the project !!!!
I assume what im going to have to try now is to configure sendmail to relay to either the exchange server or the isp's server and configure them to let it in... which is starting to sound like a lot of fun....
mail servers aint really my bag, and im on the edges of my knowledge !!!! arghhhh
dont you just love it when they drop, " can you just get it to mail that file " at the end of the project !!!!
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff


