Windows Vista Key
Discussion
Briefly:
Purchased upgrade version of vista home prem for xp
Upgrade failed
went for clean install
worked ok
cant use product key as its for upgrade only, tried upgrading the key to the full version, but it says I need the current version (ie the one I am trying to register in the first f****ng place) registered.
Question how do I buy a full version key, tried Microsoft but going around in cirlces
Purchased upgrade version of vista home prem for xp
Upgrade failed
went for clean install
worked ok
cant use product key as its for upgrade only, tried upgrading the key to the full version, but it says I need the current version (ie the one I am trying to register in the first f****ng place) registered.
Question how do I buy a full version key, tried Microsoft but going around in cirlces
If it's a clean install (and an upgrade Vista) I think you need to put your old Windows (98/XP) disc in the drive at that point and use that versions product key, it then certifies it as the full version, then it asks you to put the Vista upgrade back in to certify that and install it?
I remember I had to do that with XP.
I remember I had to do that with XP.
Edited by FourWheelDrift on Saturday 10th February 15:46
I don't think putting the old XP or win98 cd thing works now, these instructions were sent to me on how to do a full clean install using the Vista upgrade disk, I haven't used them yet so can't confirm whether they work or not yet.
Here's a simplified overview of the steps that are required to clean-install the upgrade version of Vista:
Step 1. Boot the PC from the Vista DVD.
Step 2. Select "Install Now," but do not enter the Product Key from the Vista packaging. Leave the input box blank. Also, turn off the option Automatically activate Windows when I'm online. In the next dialog box that appears, confirm that you really do want to install Vista without entering a Product Key.
Step 3. Correctly indicate the version of Vista that you're installing: Home Basic, Home Premium, Business, or Ultimate.
Step 4. Select the "Custom (Advanced)" install, not the "Upgrade" install.
Step 5. Vista copies files at length and reboots itself one or more times. Wait for the install to complete. At this point, you might think that you could "activate" Vista, but you can't. That's because you haven't installed the Vista upgrade yet. To do that, run the DVD's setup.exe program again, but this time from the Vista desktop. The easiest way to start setup again is to eject and then reinsert the DVD.
Step 6. Click "Install Now." Select Do not get the latest updates for installation. (You can check for these updates later.)
Step 7. This time, do enter the Product Key from the Vista packaging. Once again, turn off the option Automatically activate Windows when I'm online.
Step 8. On this second install, make sure to select "Upgrade," not "Custom (Advanced)." You're not doing a clean install now, you're upgrading to Vista.
Step 9. Wait while Vista copies files and reboots itself. No user interaction is required. Do not boot from the DVD when asked if you'd like to do so. Instead, wait a few seconds and the setup process will continue on its way. Some DOS-like, character-mode menus will appear, but don't interact with them. After a few seconds, the correct choice will run for you automatically.
Step 10. After you click a button labeled Start in the Thank You dialog box, Vista's login screen will eventually appear. Enter the username and password that you selected during the first install. You're done upgrading to Vista.
Step 11. Within 30 days, you must "activate" your copy of Vista or it'll lose functionality. To activate Vista, click Show more details in the Welcome Center that automatically displays upon each boot-up, then click Activate Windows now. If you've dismissed the Welcome Center, access the correct dialog box by clicking Start, Control Panel, System & Maintenance, System. If you purchased a legitimate copy of Vista, it should quickly activate over the Internet. (You can instead activate by calling Microsoft on the phone, which avoids your PC exchanging information with Microsoft's server.)
Here's a simplified overview of the steps that are required to clean-install the upgrade version of Vista:
Step 1. Boot the PC from the Vista DVD.
Step 2. Select "Install Now," but do not enter the Product Key from the Vista packaging. Leave the input box blank. Also, turn off the option Automatically activate Windows when I'm online. In the next dialog box that appears, confirm that you really do want to install Vista without entering a Product Key.
Step 3. Correctly indicate the version of Vista that you're installing: Home Basic, Home Premium, Business, or Ultimate.
Step 4. Select the "Custom (Advanced)" install, not the "Upgrade" install.
Step 5. Vista copies files at length and reboots itself one or more times. Wait for the install to complete. At this point, you might think that you could "activate" Vista, but you can't. That's because you haven't installed the Vista upgrade yet. To do that, run the DVD's setup.exe program again, but this time from the Vista desktop. The easiest way to start setup again is to eject and then reinsert the DVD.
Step 6. Click "Install Now." Select Do not get the latest updates for installation. (You can check for these updates later.)
Step 7. This time, do enter the Product Key from the Vista packaging. Once again, turn off the option Automatically activate Windows when I'm online.
Step 8. On this second install, make sure to select "Upgrade," not "Custom (Advanced)." You're not doing a clean install now, you're upgrading to Vista.
Step 9. Wait while Vista copies files and reboots itself. No user interaction is required. Do not boot from the DVD when asked if you'd like to do so. Instead, wait a few seconds and the setup process will continue on its way. Some DOS-like, character-mode menus will appear, but don't interact with them. After a few seconds, the correct choice will run for you automatically.
Step 10. After you click a button labeled Start in the Thank You dialog box, Vista's login screen will eventually appear. Enter the username and password that you selected during the first install. You're done upgrading to Vista.
Step 11. Within 30 days, you must "activate" your copy of Vista or it'll lose functionality. To activate Vista, click Show more details in the Welcome Center that automatically displays upon each boot-up, then click Activate Windows now. If you've dismissed the Welcome Center, access the correct dialog box by clicking Start, Control Panel, System & Maintenance, System. If you purchased a legitimate copy of Vista, it should quickly activate over the Internet. (You can instead activate by calling Microsoft on the phone, which avoids your PC exchanging information with Microsoft's server.)
Ian_H said:
I don't think putting the old XP or win98 cd thing works now, these instructions were sent to me on how to do a full clean install using the Vista upgrade disk, I haven't used them yet so can't confirm whether they work or not yet.
Here's a simplified overview of the steps that are required to clean-install the upgrade version of Vista:
Step 1. Boot the PC from the Vista DVD.
Step 2. Select "Install Now," but do not enter the Product Key from the Vista packaging. Leave the input box blank. Also, turn off the option Automatically activate Windows when I'm online. In the next dialog box that appears, confirm that you really do want to install Vista without entering a Product Key.
Step 3. Correctly indicate the version of Vista that you're installing: Home Basic, Home Premium, Business, or Ultimate.
Step 4. Select the "Custom (Advanced)" install, not the "Upgrade" install.
Step 5. Vista copies files at length and reboots itself one or more times. Wait for the install to complete. At this point, you might think that you could "activate" Vista, but you can't. That's because you haven't installed the Vista upgrade yet. To do that, run the DVD's setup.exe program again, but this time from the Vista desktop. The easiest way to start setup again is to eject and then reinsert the DVD.
Step 6. Click "Install Now." Select Do not get the latest updates for installation. (You can check for these updates later.)
Step 7. This time, do enter the Product Key from the Vista packaging. Once again, turn off the option Automatically activate Windows when I'm online.
Step 8. On this second install, make sure to select "Upgrade," not "Custom (Advanced)." You're not doing a clean install now, you're upgrading to Vista.
Step 9. Wait while Vista copies files and reboots itself. No user interaction is required. Do not boot from the DVD when asked if you'd like to do so. Instead, wait a few seconds and the setup process will continue on its way. Some DOS-like, character-mode menus will appear, but don't interact with them. After a few seconds, the correct choice will run for you automatically.
Step 10. After you click a button labeled Start in the Thank You dialog box, Vista's login screen will eventually appear. Enter the username and password that you selected during the first install. You're done upgrading to Vista.
Step 11. Within 30 days, you must "activate" your copy of Vista or it'll lose functionality. To activate Vista, click Show more details in the Welcome Center that automatically displays upon each boot-up, then click Activate Windows now. If you've dismissed the Welcome Center, access the correct dialog box by clicking Start, Control Panel, System & Maintenance, System. If you purchased a legitimate copy of Vista, it should quickly activate over the Internet. (You can instead activate by calling Microsoft on the phone, which avoids your PC exchanging information with Microsoft's server.)
Here's a simplified overview of the steps that are required to clean-install the upgrade version of Vista:
Step 1. Boot the PC from the Vista DVD.
Step 2. Select "Install Now," but do not enter the Product Key from the Vista packaging. Leave the input box blank. Also, turn off the option Automatically activate Windows when I'm online. In the next dialog box that appears, confirm that you really do want to install Vista without entering a Product Key.
Step 3. Correctly indicate the version of Vista that you're installing: Home Basic, Home Premium, Business, or Ultimate.
Step 4. Select the "Custom (Advanced)" install, not the "Upgrade" install.
Step 5. Vista copies files at length and reboots itself one or more times. Wait for the install to complete. At this point, you might think that you could "activate" Vista, but you can't. That's because you haven't installed the Vista upgrade yet. To do that, run the DVD's setup.exe program again, but this time from the Vista desktop. The easiest way to start setup again is to eject and then reinsert the DVD.
Step 6. Click "Install Now." Select Do not get the latest updates for installation. (You can check for these updates later.)
Step 7. This time, do enter the Product Key from the Vista packaging. Once again, turn off the option Automatically activate Windows when I'm online.
Step 8. On this second install, make sure to select "Upgrade," not "Custom (Advanced)." You're not doing a clean install now, you're upgrading to Vista.
Step 9. Wait while Vista copies files and reboots itself. No user interaction is required. Do not boot from the DVD when asked if you'd like to do so. Instead, wait a few seconds and the setup process will continue on its way. Some DOS-like, character-mode menus will appear, but don't interact with them. After a few seconds, the correct choice will run for you automatically.
Step 10. After you click a button labeled Start in the Thank You dialog box, Vista's login screen will eventually appear. Enter the username and password that you selected during the first install. You're done upgrading to Vista.
Step 11. Within 30 days, you must "activate" your copy of Vista or it'll lose functionality. To activate Vista, click Show more details in the Welcome Center that automatically displays upon each boot-up, then click Activate Windows now. If you've dismissed the Welcome Center, access the correct dialog box by clicking Start, Control Panel, System & Maintenance, System. If you purchased a legitimate copy of Vista, it should quickly activate over the Internet. (You can instead activate by calling Microsoft on the phone, which avoids your PC exchanging information with Microsoft's server.)
Worked a treat. Thanks very much
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff