Building Domain trust between NT4 and 2000
Discussion
i am trying to get a 2 way trust relationship between NT4 and 2000 AD
my nt4 domain has the 2000 domain as a trusting domain but i can't get the trusted domain to connect, on the 2000 box i have both trusting and trusting working ,
i have used lmhosts files to set the domain records as wins in not used ,
172.xx.x.xx [domain controller] #PRE #DOM:[domain]
172.xx.x.xx "[domain]\0x1b" #PRE
the problem is when i ping the 2000 domain from the nt4 box it is ok and returns an ip address
the other problem is they are on different ip ranges class b and C which i don't believe to be an issue as i have a one way trust
any ideas
my nt4 domain has the 2000 domain as a trusting domain but i can't get the trusted domain to connect, on the 2000 box i have both trusting and trusting working ,
i have used lmhosts files to set the domain records as wins in not used ,
172.xx.x.xx [domain controller] #PRE #DOM:[domain]
172.xx.x.xx "[domain]\0x1b" #PRE
the problem is when i ping the 2000 domain from the nt4 box it is ok and returns an ip address
the other problem is they are on different ip ranges class b and C which i don't believe to be an issue as i have a one way trust
any ideas
Bit confused about what entries for the trusts you have currently configured on both boxes - any chance of some screenshots?
Configuring a trust between the 2 is pretty much the same as you would between 2 NT 4 domains - except on the 2000 box use the Active Directory Domains & Trusts admin tool to add a trust to the NT domain.
On the NT server, you say you have an entry for 2000 box as the trusting domain - meaning the Windows 2000 AD will allow the NT 4 domain access to it's resources assuming the Windows 2000 server has a "Trusted" entry for the NT domain (obviously bit more to it than that).
That would be just a one way trust though...
For a 2-way trust, add an entry on the NT 4.0 server for the Windows 2000 domain as a "Trusted" domain
On the Windows 2000 domain, add an entry for the NT 4.0 domain as a "Trusting" domain
Configuring a trust between the 2 is pretty much the same as you would between 2 NT 4 domains - except on the 2000 box use the Active Directory Domains & Trusts admin tool to add a trust to the NT domain.
On the NT server, you say you have an entry for 2000 box as the trusting domain - meaning the Windows 2000 AD will allow the NT 4 domain access to it's resources assuming the Windows 2000 server has a "Trusted" entry for the NT domain (obviously bit more to it than that).
That would be just a one way trust though...
For a 2-way trust, add an entry on the NT 4.0 server for the Windows 2000 domain as a "Trusted" domain
On the Windows 2000 domain, add an entry for the NT 4.0 domain as a "Trusting" domain
Edited by BaconBonce on Friday 29th June 15:02
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff


