2 wireless laptops - file transfer
Discussion
How do I get 2 laptops which are wirelessly connected to the same router to see each other so that I can http or ftp file transfer files between them?
As it's on 'my side' of the router there shouldn't be firewall problems should there?
I've tried to http the ip address of 1 from the other in IE but the router blocks access.
Ta.
As it's on 'my side' of the router there shouldn't be firewall problems should there?
I've tried to http the ip address of 1 from the other in IE but the router blocks access.
Ta.
you should be able to just go to the C: drive of one machine, setup Sharing ,eg Share As Cdrive
once the sharing is setup, join both machines to the same workgroup
Then go to the other machine and in the Start|Run box just type \\%HOSTNAME%\Cdrive
where %HOSTNAME% is the name of the first PC, eg IBMT60 or whatever. If you are unsure of the hostname, open a command prompt with the cmd.exe command and type: hostname and hit return.
Alternativelty, once you've setup the workgroup you should be able to browse the other computer from the explorer menu under Network Neighbourhood.
once the sharing is setup, join both machines to the same workgroup
Then go to the other machine and in the Start|Run box just type \\%HOSTNAME%\Cdrive
where %HOSTNAME% is the name of the first PC, eg IBMT60 or whatever. If you are unsure of the hostname, open a command prompt with the cmd.exe command and type: hostname and hit return.
Alternativelty, once you've setup the workgroup you should be able to browse the other computer from the explorer menu under Network Neighbourhood.
Thanks.
I've set them up on the same workgroup as clients for ms networks.
I've set up printer and file sharing on 1 machine and I can see it on the other but;
1. I'm not allowed access and;
2. Zonealarm keeps showing a red warning to say it has blocked access to my machine from the other machine.
So 1 may be caused by 2.
Any zonealarm experts around?
I've set them up on the same workgroup as clients for ms networks.
I've set up printer and file sharing on 1 machine and I can see it on the other but;
1. I'm not allowed access and;
2. Zonealarm keeps showing a red warning to say it has blocked access to my machine from the other machine.
So 1 may be caused by 2.
Any zonealarm experts around?
rfisher said:
Thanks.
I've set them up on the same workgroup as clients for ms networks.
I've set up printer and file sharing on 1 machine and I can see it on the other but;
1. I'm not allowed access and;
2. Zonealarm keeps showing a red warning to say it has blocked access to my machine from the other machine.
So 1 may be caused by 2.
Any zonealarm experts around?
Tell Zonealarm to unblock? I've set them up on the same workgroup as clients for ms networks.
I've set up printer and file sharing on 1 machine and I can see it on the other but;
1. I'm not allowed access and;
2. Zonealarm keeps showing a red warning to say it has blocked access to my machine from the other machine.
So 1 may be caused by 2.
Any zonealarm experts around?
I would uninstall Zonealarm, and use the native XP firewall (if you are running XP) and depend on the firewall in your wireless router. That's what I do and I setup PCs for a side living. Works for me.
You need to set up your local network as a trusted zone in Zonealarm.
First, you need to know the local network IP addresses for each laptop. Go to the start menu and click Run, then type cmd into the Open: field. In the command prompt window that then opens, type ipconfig. Look for the line that says something like "IP Address. . . . . : 192.168.0.1", and make a note of the actual IP shown.
Next, on each laptop open the ZA window, click Firewall in the left-hand column, then the Zones tab in the upper-right corner. Down the bottom of the window, click the Add>> button, then select IP Range from the pop-up menu that appears. A new window titled Add IP Range will open, with four things to set up...
Zone: Set to Trusted
IP Address: Enter the first IP address in your local network
IP Address: Enter the last IP address in your local network
Description: Type whatever you like here, ZA only complains if you leave it blank...
e.g. if laptop 1 has an IP of 192.168.0.2 and laptop 2 has an IP of 192.168.0.1, you'd use 192.168.0.1 as the first address and 192.168.0.2 as the last address.
Click OK on the Add IP Range window, then click Apply in the lower-right corner of the main ZA window.
Remember, you need to do this to ZA on BOTH laptops...
First, you need to know the local network IP addresses for each laptop. Go to the start menu and click Run, then type cmd into the Open: field. In the command prompt window that then opens, type ipconfig. Look for the line that says something like "IP Address. . . . . : 192.168.0.1", and make a note of the actual IP shown.
Next, on each laptop open the ZA window, click Firewall in the left-hand column, then the Zones tab in the upper-right corner. Down the bottom of the window, click the Add>> button, then select IP Range from the pop-up menu that appears. A new window titled Add IP Range will open, with four things to set up...
Zone: Set to Trusted
IP Address: Enter the first IP address in your local network
IP Address: Enter the last IP address in your local network
Description: Type whatever you like here, ZA only complains if you leave it blank...
e.g. if laptop 1 has an IP of 192.168.0.2 and laptop 2 has an IP of 192.168.0.1, you'd use 192.168.0.1 as the first address and 192.168.0.2 as the last address.
Click OK on the Add IP Range window, then click Apply in the lower-right corner of the main ZA window.
Remember, you need to do this to ZA on BOTH laptops...
Stuart G Gray said:
Tell Zonealarm to unblock?
I would uninstall Zonealarm, and use the native XP firewall (if you are running XP) and depend on the firewall in your wireless router. That's what I do and I setup PCs for a side living. Works for me.
ZoneAlarm is just about the best firewall you can get, and it's free. The standard XP firewall is as much use as a chocolate fireguard. Why on earth would you recommend going back to that POS?I would uninstall Zonealarm, and use the native XP firewall (if you are running XP) and depend on the firewall in your wireless router. That's what I do and I setup PCs for a side living. Works for me.
Just configure ZA to put the other machine(s) in the trusted zone. Then set up file sharing as normal.
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff


