Media PC - running in 1080?
Author
Discussion

Altrezia

Original Poster:

8,742 posts

242 months

Friday 29th June 2007
quotequote all
hello

got a pc plugged into my tv with the vga port. the tv is a toshiba 1080i jobby.

windows doesnt have the option to display at 19whatever x 1080, is there a way to force it?

it's windows xp.

thanks
a

Mroad

829 posts

246 months

Friday 29th June 2007
quotequote all
A 32in LCD TV's native resolution is usually 1366x768 pixels, the TV scales HD inputs to fit this resolution (up scales 720 or down scales 1080).

You don't want to set up your PC to output 1080 as the TV will just down scale it, you want to set it up to the LCD panels native resolution i.e. 1366x768 @ 50 or 60Hz. This is called 1 to 1 pixel mapping and means you will get the best match from your PC to your screen. When watching HD material via your PC, the PC can then do all the scaling rather than the TV.

Your TV manual should tell you the compatiable resolutions the VGA input can take (if 1366x768 doesn't work or is not available try 1360x768 or 1280x768).

Altrezia

Original Poster:

8,742 posts

242 months

Saturday 30th June 2007
quotequote all
its a 42" full 1080i tv. smile

thanks for the info!

NWMark

530 posts

247 months

Saturday 30th June 2007
quotequote all
the resolutions that show up in the display setting are based on the drivers that you have isntalled for the monitor you currently use i.e. your PC monitor, you can either install different monitor drivers or just install something like "Powerstrip" that will let you specify any resolution and refresh you desire, as long as your graphics card supports it.

Most graphics cards nowadays support resolutions much higher than most high ends displays anyway so this shouldnt be an issue.

Mark

p.s. its also worth checking the manual for the recommended VGA settings as i have a 1366x720 toshiba 37" TV that does not support 1:1 pixel mapping, I have to use 1280x720. so 1920x1080 might not be the setting you need.

Edited by NWMark on Saturday 30th June 18:38

Altrezia

Original Poster:

8,742 posts

242 months

Saturday 30th June 2007
quotequote all
lovely, thanks!

eyebeebe

3,875 posts

264 months

Saturday 30th June 2007
quotequote all
The chances are if you don't have a 1080p tv, your panel won't be running at 1920 x 1080, but rather the screen will be taking the 1080i input and downscaling it to the native resolution of the screen.

Best thing to do is check your manual or online for the native resolution of your panel and set your driver to run at that.

Altrezia

Original Poster:

8,742 posts

242 months

Sunday 1st July 2007
quotequote all
This is my telly.

http://www.trustedreviews.com/tvs/review/2006/07/1...

Half way down

Altrezia said:
There are two very important aspects to the 42WLT66 – it has a native resolution of 1,920 x 1,080
Now I'm even more confused! ha ha

Edited by Altrezia on Sunday 1st July 10:20


Edited by Altrezia on Sunday 1st July 10:20

Zod

35,295 posts

289 months

Monday 2nd July 2007
quotequote all
what graphics car? Nvidia's drivers have a setting to treat the screen as an HDTV and then you can set resolution to 1080i or p. My MediaCenter PC runs my 46" Sony at 1080p with 1:1 pixel mapping. It is very good.

Altrezia

Original Poster:

8,742 posts

242 months

Monday 2nd July 2007
quotequote all
thats the problem I think, its currently a really shite geforce 440mx.

JimboCTR

295 posts

241 months

Monday 2nd July 2007
quotequote all
Not much help without being at home to check drivers/card makes etc but I have that Toshiba Panel and have it hooked up to a media centre PC. My TV (Not sure off the top of my head if its EXACTLY the same model or not) will NOT support 1080i through the VGA. I had to get a new Nvidia card that had a HDMI cable out. It was still a bastard to get to work and took much fiddling with the refresh rates in the driver settings to get it to work correctly. I had to make sure the TV was set to 1:1 at the same time as well. It does however look bloody amazing in 1080 when you feed it some downloaded 1080 content.

If your GFX card can support 1920x1080 and you are not using VGA let me know and I will check what settings I am using when I get home.

Also AVForums had a few threads on this that helped me out. Take a look there.

Jim

Edited by JimboCTR on Monday 2nd July 09:48