JVC Camcorder drivers needed
Author
Discussion

jagdpanther

Original Poster:

19,633 posts

250 months

Monday 9th July 2007
quotequote all
Howdo peoples

Ive been having problems with my camcorder software of late and instead of installing the usual bundled crap that comes with the thing (which I cannae find anyway) I thought I would look for the drivers alone, but Im not having much luck

Does anyone know where I can find the drivers for a JVC GR-DX28EK MiniDv camcorder????

Thanks in advance

~S~

daveenty

2,385 posts

241 months

Monday 9th July 2007
quotequote all
Found THIS ONE, but no guarantees with it.

It's from driverguide, so if it asks you for a login/password, just use drivers/all

Not a good write up with it, though it may do what you need. Hope so anyhow smile


Apparently JVC don't support on their site. Only way is to buy a disk?


jagdpanther

Original Poster:

19,633 posts

250 months

Monday 9th July 2007
quotequote all
daveenty said:
Found THIS ONE, but no guarantees with it.

It's from driverguide, so if it asks you for a login/password, just use drivers/all

Not a good write up with it, though it may do what you need. Hope so anyhow smile


Apparently JVC don't support on their site. Only way is to buy a disk?
Yeah that looks to be about right with JVC and its disgusting that the software they supply which is Imagemixer 1.7, happens to be the most unreliable piece of software known to man!!

It wont even recognise the camcorder let alone let me capture then it decides it wants to shut the PC down and the PC was built, literally a month ago, by someone who knows what hes doing and with the purpose of video editing in mind biggrin

twister

1,595 posts

267 months

Monday 9th July 2007
quotequote all
Are you capturing via Firewire, and does the camera show up at all in Device Manager? If so, try a third-party capture utility like WinDV

jagdpanther

Original Poster:

19,633 posts

250 months

Monday 16th July 2007
quotequote all
twister said:
Are you capturing via Firewire, and does the camera show up at all in Device Manager? If so, try a third-party capture utility like WinDV
Im capturing through the supplied USB connector...is this firewire?

It is showing up in the device manager under the USB connections when its connected and switched on

Ive just downloaded windv, hopefully it'll do the trick

Thanks for the help, lets see if it works smile




ETA


Windv is coming up with the error message

Error: Can't find DV output pin?

Edited by jagdpanther on Monday 16th July 11:37

JulianHJ

8,871 posts

293 months

Monday 16th July 2007
quotequote all
I've got a JVC MiniDV, was a gift about 6 weeks ago. From reading the blurb I got ther impression that the USB cable was downloading for stills, and that a Firewire cable was required for DV. I've bought a firewire cable but have not yet attempted to download anything.

jagdpanther

Original Poster:

19,633 posts

250 months

Monday 16th July 2007
quotequote all
JulianHJ said:
I've got a JVC MiniDV, was a gift about 6 weeks ago. From reading the blurb I got ther impression that the USB cable was downloading for stills, and that a Firewire cable was required for DV. I've bought a firewire cable but have not yet attempted to download anything.
Right...where did you buy the firewire from then?

Mine doesnt take the stills that yours does, but I can see where you're coming from and to be honest Id love to do some footage of my own again so I think the investment is worthwhile!

The software that comes with JVC camcorders is shite to the extent that Ieven emailed Pixela and told them when asking for help with it......still no reply hehe

JulianHJ

8,871 posts

293 months

Monday 16th July 2007
quotequote all
I got a Belkin Firewire cable from Play - cheapest I could find and a known brand/retailer that I trust.

jagdpanther

Original Poster:

19,633 posts

250 months

Monday 16th July 2007
quotequote all
JulianHJ said:
I got a Belkin Firewire cable from Play - cheapest I could find and a known brand/retailer that I trust.
Just spoken to some technical bods and it turns out my pc is not equipped for Firewire without shelling out for a card

Back to square one

Any idea why my PC software wont recognise my JVC camcorder when all the drivers are present and correct, the USB wire isnt broken and the camcorder works fine?

Good god this is burning my head and Ive been looking for a solution for ages

Even Windows Movie Maker crashes when I try to capture......

m12_nathan

5,138 posts

290 months

Monday 16th July 2007
quotequote all
Are you sure you can capture over USB? Firewire is the norm.

jagdpanther

Original Poster:

19,633 posts

250 months

Monday 16th July 2007
quotequote all
m12_nathan said:
Are you sure you can capture over USB? Firewire is the norm.
Its always captured through USB with no problems previously

JulianHJ

8,871 posts

293 months

Monday 16th July 2007
quotequote all
Just been using WinDV as recommended above and it all seems really straight-forward. Dead simple and worked first time.

jagdpanther

Original Poster:

19,633 posts

250 months

Monday 16th July 2007
quotequote all
JulianHJ said:
Just been using WinDV as recommended above and it all seems really straight-forward. Dead simple and worked first time.
Tried it, but it couldnt find the pin on the connection which sounds to me like I need to buy a Capture card with Firewire jobby rolleyes

twister

1,595 posts

267 months

Monday 16th July 2007
quotequote all
jagdpanther said:
Its always captured through USB with no problems previously
Hmm, are you saying you've been able to transfer stuff from tape to PC via USB, or that you've been able to do live capture (as a webcam) over USB? Given that JVC have gone to the trouble/expense of providing a Firewire-out socket on the camera, and given that I haven't found any reference online to it streaming DV footage over USB, I'd be surprised if you have been able to pull pre-recorded stuff off the camera - particularly whilst maintaining the original DV quality - over the USB connection.

jagdpanther

Original Poster:

19,633 posts

250 months

Tuesday 17th July 2007
quotequote all
twister said:
jagdpanther said:
Its always captured through USB with no problems previously
Hmm, are you saying you've been able to transfer stuff from tape to PC via USB, or that you've been able to do live capture (as a webcam) over USB? Given that JVC have gone to the trouble/expense of providing a Firewire-out socket on the camera, and given that I haven't found any reference online to it streaming DV footage over USB, I'd be surprised if you have been able to pull pre-recorded stuff off the camera - particularly whilst maintaining the original DV quality - over the USB connection.
Seriously, on the old machine I have been able to transfer pre-recorded footage from the camcorder onto the PC using nothing more than the USB cable and I thought this was the normal day to day thing

Ive always thought the quality wasnt as good as it should be, but its my first camcorder and didnt know any different

On my old machine, it worked fine up until about 6 months before I got the new one when, after a re-install of the OS it completely refused to recognise the camcorder via USB through the Pixela Imagemixer software and would no longer capture, but I managed to capture using Windows Movie Maker, but the quality was abismal, but once again, I was only using the USB cable supplied

Now Im told that I shouldnt have been able to transfer using USB and that I need a capture card????

Which is confusing as I had a seperate GFX card with capture capabilities on the old machine, but never had a firewire cable nor used the connection ports, only USB

twister

1,595 posts

267 months

Tuesday 17th July 2007
quotequote all
It's an odd one this, reading the PDF manuals on the JVC UK site does suggest DV transfer is possible via USB, yet reading third-party comments from other users of this camera suggest that it doesn't work at all/doesn't work except in live capture (webcam) mode/doesn't work unless you fork out extra for video capture software that can handle DV transfers via USB... Quite honestly, if you're serious about capturing the original DV recordings from the camera with the minimum of hassle, I wouldn't even think twice about buying a firewire card, because once your PC is equipped with the de facto standard interface for DV transfer, you'll find endless software support.

OTOH, if you're really keen to keep on plugging away at the USB route, then you might want to have a look at some of the driver packages available from JVC Canada - the "USB Drivers for 2001 Model DV Cameras" might be a good one to start with, since your camera seems to hail from around that time.

jagdpanther

Original Poster:

19,633 posts

250 months

Tuesday 17th July 2007
quotequote all
twister said:
It's an odd one this, reading the PDF manuals on the JVC UK site does suggest DV transfer is possible via USB, yet reading third-party comments from other users of this camera suggest that it doesn't work at all/doesn't work except in live capture (webcam) mode/doesn't work unless you fork out extra for video capture software that can handle DV transfers via USB... Quite honestly, if you're serious about capturing the original DV recordings from the camera with the minimum of hassle, I wouldn't even think twice about buying a firewire card, because once your PC is equipped with the de facto standard interface for DV transfer, you'll find endless software support.

OTOH, if you're really keen to keep on plugging away at the USB route, then you might want to have a look at some of the driver packages available from JVC Canada - the "USB Drivers for 2001 Model DV Cameras" might be a good one to start with, since your camera seems to hail from around that time.
2001?????

The camcorder is only a couple of years old...2 at the very most

I'll have a look though, but Im definitely going to head down the Firewire/Capture card route at some point soon as I enjoy filming and at the moment its completely pointless frown

twister

1,595 posts

267 months

Tuesday 17th July 2007
quotequote all
jagdpanther said:
2001?????

The camcorder is only a couple of years old...2 at the very most
Ahh, I think I see what's happened here... somewhere along the line Amazon have reset their "Date first available at" information, or applied a default date to products that never had that information when first added.

jagdpanther

Original Poster:

19,633 posts

250 months

Tuesday 17th July 2007
quotequote all
twister said:
jagdpanther said:
2001?????

The camcorder is only a couple of years old...2 at the very most
Ahh, I think I see what's happened here... somewhere along the line Amazon have reset their "Date first available at" information, or applied a default date to products that never had that information when first added.
I think I received the camcorder as a Xmas gift in 2004/2005 and it was bought from a shop so Im assuming it was no more than a 12 month old model??

SoftwareSorcerer

437 posts

280 months

Tuesday 17th July 2007
quotequote all
Just to add to the confusion...

With my camcorder, I can capture on this laptop using either USB or Firewire.

The difference in quality is immense though - with USB it's very poor, with Firewire it's fantastic!

If you want to have a go with my laptop and Firewire cable, we can meet up and test it old chap.