Ste by Step hard drive
Author
Discussion

riwiho

Original Poster:

3,805 posts

246 months

Wednesday 25th July 2007
quotequote all
About a year ago I bought a new Dell computer to replace my old one. The old unit has been sat in our spare room doing a great deal of nothing for this period.

I would not like to retrieve what is on the old hard drive. For some reason when I plug this computer in and hook it up to a screen it does not even tick over (!) so I want to know how easy it is to take the old hard drive out and put it in the new computer along side the current hard drive (obviously with the old hard drive only been accessible rather than running the OS).

I know very little about this sort of thing so any step by step pointers or websites you know which could help me would be appreciated.

Thanks

ThePassenger

6,962 posts

266 months

Wednesday 25th July 2007
quotequote all
Right.

Step 1. Indentify the drive type.
* Open the side panels of both machines.
* Look for the drive cable.
* If one is large and flat (ohh about 80pins in it) and the other is thin and flat. Yes? Give up now.

Step 2. They're both the same type of cable!
* Screw driver in hand (remove it from childs nose and clean first) slowly unfasten the screws holding the drive in.
  • If when you have removed two screws it falls to the bottom of the cage, have a beer and mumble obscenities. The drives fine, but any excuse for a beer and rant is a good one.
  • Pull the drive cables out of it and transfer the drive to the new machine, telling it 'good hard drive, pretty hard drive' will not have any effect on the success of the operation but will entertain the cats/child/SWIMBO.
  • Insertion is the reverse of extraction (i.e. no, we couldn't put it back together again either).
Step 3. Yippie! I've connected it up and only used 1/2 roll of duct tape.
* Turn on computer.
* It will complain about the new drive.
* Tell it every thing's fine, you're an expert in these things and it should do as it's told (Press Y or select 'Quit and Save' then tell it 'Y').
  • Windows will load.
  • Copy data
Step 4. The computer doesn't turn on.
* Congrats, you've just installed a dead hard drive.

Jinx

12,023 posts

291 months

Wednesday 25th July 2007
quotequote all
Step 1a (from Sarah's list above)

Purchase one of these http://www.maplin.co.uk/module.aspx?ModuleNo=48213&doy=25m7#overview 

Insert old drive into purchase. Plug-in to relevent holes. Let XP find new hardware......

cjs

11,723 posts

282 months

Wednesday 25th July 2007
quotequote all
I would also recommend just buying and external USB enclosure. I have done this for my old Laptop HD and I now have a portable HD.

It is very easy to fit the HD into the enclosure and then its just plug and play. You should be able to get one for around £20 if you look.

Edited by cjs on Wednesday 25th July 17:23

LordGrover

34,191 posts

243 months

Thursday 26th July 2007
quotequote all
maybe an issue with master/slave config though ... it'll say on the disk how to set the jumpers.