Solidworks users - little help please?!
Discussion
I'm trying to get a collection of lofted surfaces to form a solid object and am having no luck. I've got them all to knit fine, but it just will NOT thicken?!
As a test I made a new part and roughly re-created the surfaces, and this knitted and thickened fine, but the "real" one just wont do it.
What are the key causes of thickening failing? Would help if it gave a little more info than "failed" in the what's wrong dialogue
oh - SW '06 BTW and I am definitely an amature with it!
As a test I made a new part and roughly re-created the surfaces, and this knitted and thickened fine, but the "real" one just wont do it.
What are the key causes of thickening failing? Would help if it gave a little more info than "failed" in the what's wrong dialogue

oh - SW '06 BTW and I am definitely an amature with it!
Not a Solidworks user myself (I use Catia) but could it be that the geometry is too "tight" so that when you try to thicken the solid it trying to overlap itself?
Will the surface thicken in one direction but not the other (ie, it will work "outwards" but not "inwards"
Will the surface itself offset to the distance you want?
Will the surface thicken in one direction but not the other (ie, it will work "outwards" but not "inwards"

Will the surface itself offset to the distance you want?
egomeister said:
Not a Solidworks user myself (I use Catia) but could it be that the geometry is too "tight" so that when you try to thicken the solid it trying to overlap itself?
Will the surface thicken in one direction but not the other (ie, it will work "outwards" but not "inwards"
Will the surface itself offset to the distance you want?
Wot he sad^^Will the surface thicken in one direction but not the other (ie, it will work "outwards" but not "inwards"

Will the surface itself offset to the distance you want?
Being a Pro/E user myself, I'd check if thicken works with a lower value, and then check in preview where it collides.
as far as I can tell the knitted edges all look fine, there was one suspect area but I tried running a thicken with that one removed from the knit and still no joy.
as for the geometry being too tight - I think it's unlikely but in all honesty with SW from my experience to date that doesn't count for much! The part I'm trying to knit and thicken is the front clam on my car design (pic in profile) so the only major return was the "bumper" area. The image in my profile pic is actually thickened perfectly, but due to relocating the radiator I'm having a bit of a redesign - a bit curvier, less of return angle on the front dam (which I thought would aid thickening!!)
It wont thicken inward or outward, or at any thickness from 1mm to 100mm.
It will however offset perfectly...
Why didn't I do this work in clay again?!
as for the geometry being too tight - I think it's unlikely but in all honesty with SW from my experience to date that doesn't count for much! The part I'm trying to knit and thicken is the front clam on my car design (pic in profile) so the only major return was the "bumper" area. The image in my profile pic is actually thickened perfectly, but due to relocating the radiator I'm having a bit of a redesign - a bit curvier, less of return angle on the front dam (which I thought would aid thickening!!)
It wont thicken inward or outward, or at any thickness from 1mm to 100mm.
It will however offset perfectly...

Why didn't I do this work in clay again?!
It's been a bit since I've used SW as well, but here's a (possibly stupid) idea: have you tried alternative ways of creating your 3d part, such (adding) extrusion(s)?
When things weren't working for me, it was sometimes a better idea to just use a different approach then to find the cause
When things weren't working for me, it was sometimes a better idea to just use a different approach then to find the cause

Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff


