Really obscure Kyocera printer question...
Discussion
Back in, oh about 1987, Kyocera released a laser printer called the F-1000. PostScript back then was mega expensive to licence and Kyocera didn't like HP's PCL, so they invented their own rudimentary Page Description Language. I learned the language and spent considerable amounts of time programming it to produce documents needed in a busy insurance office (credit agreements, proposal forms, car rental agreements, etc.) We had a DEC PDP-11 minicomputer and dumb terminals (DEC VT220). Fancy graphics? A mouse? Forget it.
It was not easy, and the youngsters today (bah, humbug) would be appalled that you had to use arcane instructions to lay out a page rather than visually using QuarkXPress or InDesign.
Instructions were of the form (from memory, it's been a while):
MZP 0,0;
DAP 150,0;
MRP 150,0;
DRP 0,150;
TXT 'This is fun';
I'm trying to recall the name of the Page Description Language, but can't. It was most probably used in other Kyocera printers of that era. Google is not my friend tonight. Does anyone recall the name?
It was not easy, and the youngsters today (bah, humbug) would be appalled that you had to use arcane instructions to lay out a page rather than visually using QuarkXPress or InDesign.
Instructions were of the form (from memory, it's been a while):
MZP 0,0;
DAP 150,0;
MRP 150,0;
DRP 0,150;
TXT 'This is fun';
I'm trying to recall the name of the Page Description Language, but can't. It was most probably used in other Kyocera printers of that era. Google is not my friend tonight. Does anyone recall the name?
Edited by .Flyer on Monday 30th July 23:07
.Flyer said:
Back in, oh about 1987, Kyocera released a laser printer called the F-1000. PostScript back then was mega expensive to licence and Kyocera didn't like HP's PCL, so they invented their own rudimentary Page Description Language. I learned the language and spent considerable amounts of time programming it to produce documents needed in a busy insurance office (credit agreements, proposal forms, car rental agreements, etc.) We had a DEC PDP-11 minicomputer and dumb terminals (DEC VT220). Fancy graphics? A mouse? Forget it.
It was not easy, and the youngsters today (bah, humbug) would be appalled that you had to use arcane instructions to lay out a page rather than visually using QuarkXPress or InDesign.
Instructions were of the form (from memory, it's been a while):
MZP 0,0;
DAP 150,0;
MRP 150,0;
DRP 0,150;
TXT 'This is fun';
I'm trying to recall the name of the Page Description Language, but can't. It was most probably used in other Kyocera printers of that era. Google is not my friend tonight. Does anyone recall the name?
HmmIt was not easy, and the youngsters today (bah, humbug) would be appalled that you had to use arcane instructions to lay out a page rather than visually using QuarkXPress or InDesign.
Instructions were of the form (from memory, it's been a while):
MZP 0,0;
DAP 150,0;
MRP 150,0;
DRP 0,150;
TXT 'This is fun';
I'm trying to recall the name of the Page Description Language, but can't. It was most probably used in other Kyocera printers of that era. Google is not my friend tonight. Does anyone recall the name?
Edited by .Flyer on Monday 30th July 23:07
Prescribe it was. I desgined hundreds of forms for the London Ins Market back then in an earlier life..
The later printers supported Jeida cards to store forms and call them from, before that they were icc cards.
The PC with the card writers had to run at 8mhz else it screwed the writing up.
.Flyer said:
Xenocide said:
Wasn't prescribe was it?!?
Brilliant, thanks guys for that, I never would have remembered Prescribe 
Of course, search for Prescribe and Kyocera and you get hundreds of hits. Just downloaded the tech ref from Kyocera and it's kick-started the memory. Oh what fun it was

it was my day in and day out job.. for about a year..
And the phone number changes in London made me very very very very very very very busy.
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff


