Discussion
My present system is
Currently Installed Memory: 1GB
Available Memory Slots: 0
Number of Banks: 2
Dual Channel Support: No
CPU Manufacturer: AuthenticAMD
CPU Family: AMD Athlon(tm) 64 Processor 3400+ Model 12, Stepping 0
CPU Speed: 2399 MHz
the Maximum Memory Capacity: 2048MB so wish to do an upgrade
Have been into the 'Crucial' site and their recommendation is
2 x 1GB
CT12872Z40B DDR PC3200 • CL=3 • Unbuffered • ECC • DDR400 • 2.6V • 128Meg x 72 that costs a total of £83 for the 2gb but also recommended are other cards which are up to double the cost such as this one
1GB
BL12864L503 DDR PC4000 • 3-4-4-8 • Unbuffered • NON-ECC • DDR500 • 2.8V • 128Meg x 64 which will be c£160
What do you recommend I purchase
Cheers
Steve
Currently Installed Memory: 1GB
Available Memory Slots: 0
Number of Banks: 2
Dual Channel Support: No
CPU Manufacturer: AuthenticAMD
CPU Family: AMD Athlon(tm) 64 Processor 3400+ Model 12, Stepping 0
CPU Speed: 2399 MHz
the Maximum Memory Capacity: 2048MB so wish to do an upgrade
Have been into the 'Crucial' site and their recommendation is
2 x 1GB
CT12872Z40B DDR PC3200 • CL=3 • Unbuffered • ECC • DDR400 • 2.6V • 128Meg x 72 that costs a total of £83 for the 2gb but also recommended are other cards which are up to double the cost such as this one
1GB
BL12864L503 DDR PC4000 • 3-4-4-8 • Unbuffered • NON-ECC • DDR500 • 2.8V • 128Meg x 64 which will be c£160
What do you recommend I purchase
Cheers
Steve
Dont bother with the PC4000 unless you intend to overclock(your board isnt running in dual channel so presume its not a overclocking based unit),with the Amd 64 CPU,s its low latency that they like, that will give you the greater boost CL2or2.5 at 1T command rate(check for stabilty 1st though with that setting) which you enable in the bios will give you a worthwhile boost,your 1st option is better than the second,i wouldent expect much difference with running the extra 1GB of memory on your system,it may be time for an upgrade if your after more performance.
In some respects I echo the above advice about not seeing any dramatic improvement from DDR400 or from going to 2GB in day to day usage.
But! The difference between DDR400 and DDR333 is, quite frankly pennies. I snagged 2x1GB DDR400, Samsung branded, units for about £45 including shipping off of ebay. For DDR333 is was £43 inc.
Assuming Crucial aren't taking the piss between the speeds, get the DDR400, every little helps.
Ohh and I'd put good money on it needing the non-ECC version, which is cheaper to boot (my old 3400+ Clawhammer core takes it).
But! The difference between DDR400 and DDR333 is, quite frankly pennies. I snagged 2x1GB DDR400, Samsung branded, units for about £45 including shipping off of ebay. For DDR333 is was £43 inc.
Assuming Crucial aren't taking the piss between the speeds, get the DDR400, every little helps.
Ohh and I'd put good money on it needing the non-ECC version, which is cheaper to boot (my old 3400+ Clawhammer core takes it).
When I ran the 'Crucial' diagnostics it said this about EEC
Does my computer support ECC memory?
A: Yes.
Your system supports ECC. You can put non-ECC modules into an ECC system, but be sure not to mix ECC and non-ECC modules within a system. Install the same type of modules that are already in your system.
Does my computer support ECC memory?
A: Yes.
Your system supports ECC. You can put non-ECC modules into an ECC system, but be sure not to mix ECC and non-ECC modules within a system. Install the same type of modules that are already in your system.
Hi
I'm no expert, but I'm not convinced that going from 1GB -> 2GB ram is going to make a significant difference.
I suppose the question is, when you are processing your image files, is the cpu maxed out or is the hd going crazy or what ?
Can your mb take a dual-core processor, and how old is your hd (and what type) ?
Replacements of either of these 2 items would could make a more significant difference.
If the cpu is maxed out, you could always consider oc'ing it. Buy a better cpu fan and away u go.
Just try'in to help......
I'm no expert, but I'm not convinced that going from 1GB -> 2GB ram is going to make a significant difference.
I suppose the question is, when you are processing your image files, is the cpu maxed out or is the hd going crazy or what ?
Can your mb take a dual-core processor, and how old is your hd (and what type) ?
Replacements of either of these 2 items would could make a more significant difference.
If the cpu is maxed out, you could always consider oc'ing it. Buy a better cpu fan and away u go.
Just try'in to help......
Ahh image processing. If you went to a 64bit OS and a 64bit image processing package you'd see around 25% improvement in pure CPU performance. 2GB of RAM can/will make 'some' improvement, but if you're HDD can't cope or the CPU is flat out... won't make much difference. Saying that, if the disk is thrashing because of excessive swap... more RAM will help and indeed less swapping would ease the CPU's lot in life.
I wouldn't drop £100 on it, perhaps £50 - £60 for 2x1GB from the states (via fleabay).
But yes, a basic C2D or indeed X2 with 2GB and SATA drives would run rings around that machine.
I wouldn't drop £100 on it, perhaps £50 - £60 for 2x1GB from the states (via fleabay).
But yes, a basic C2D or indeed X2 with 2GB and SATA drives would run rings around that machine.
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff



