Connecting an LCD TV to a PC - DVI/HDMI or VGA.....?
Connecting an LCD TV to a PC - DVI/HDMI or VGA.....?
Author
Discussion

Lurking Lawyer

Original Poster:

4,535 posts

256 months

Tuesday 21st August 2007
quotequote all
After my old gaming TV finally gave up the ghost a couple of months back, I've finally got around to replacing it with a new HD LCD TV.

I decided to kill two birds with one stone and make it do double duty as both Xbox 360 screen and also replace my venerable 17" CRT PC monitor, which is a relic of when I bought my second PC back in 1995.

The 360 connects via component leaving me with a choice of either VGA or HDMI to connect the PC. My graphics card outputs VGA and DVI, judging from the sockets on the back of the card.

A bit of reading last night leads me to believe you can get a DVI/HDMI lead. My query is whether there is any perceivable advantage to using DVI/HDMI over VGA, or vice versa?

(FWIW, I don't actually use the PC much any more as the laptop tends to get used more frequently - a bit of surfing and for word processing/e-mail on the odd occasions I work from home. It's getting a bit long in the tooth and just doesn't cut it for gaming any more, so that's not really a major issue in terms of image.)

Any guidance appreciated!

manek

2,978 posts

315 months

Tuesday 21st August 2007
quotequote all
DVI keeps the signal digital all the way but VGA converts the digital signal to analogue and shoots it down the video cable to the LCD, which converts it back to digital. You lose quality during each conversion.

It's a no-brainer.

Road2Ruin

6,580 posts

247 months

Tuesday 21st August 2007
quotequote all
manek said:
DVI keeps the signal digital all the way but VGA converts the digital signal to analogue and shoots it down the video cable to the LCD, which converts it back to digital. You lose quality during each conversion.

It's a no-brainer.
Sadly its not that simple. Whilst all above is correct you also have the problem of the native resolution of the screen. Lets say its a 1366 x 768, which is most common for HDTV, the DVI to HDMI variant will only output and receive 1280 x 720. This will look fine for movies but if you are using the web or text based programs will look awful because it has to be resized. Where as a VGA signal can be output at the exact resolution (nealry 1360 x 768). The image quality is spot on too, I know I have one that does exactly this.

Of course there is also the HDMI issue but lets not go there and confuse even more.

Edited by Road2Ruin on Tuesday 21st August 12:52

SLacKer

2,622 posts

238 months

Tuesday 21st August 2007
quotequote all
I had similiar issue with my HDTV and the Media Center.

I got HDMI working but due to the refresh available at the native resolution of the screen was unable to get satisfactory text. I now use the VGA and that is fine.

Check what kind in DVI connector you have as it determines the type of lead you need http://www.interfacebus.com/Design_Connector_Digit...


unclemark123

883 posts

239 months

Tuesday 21st August 2007
quotequote all
i have a 32" montor and use a vga on 1360 x 768 resolution and the picture is spot on. its also fine for fast moving games smile