What rating UPS do I need?
Discussion
nothing too big ...but you may as well get a power strip one for all the PC kit
I have the next one up from this
http://www.scan.co.uk/Products/APC-Back-UPS-ES-400...
it will be enough for a NAS/router for 10-15 mins ...and will connect via USB to some NAS for auto shutdown (how it works with my readynas)
I have the next one up from this
http://www.scan.co.uk/Products/APC-Back-UPS-ES-400...
it will be enough for a NAS/router for 10-15 mins ...and will connect via USB to some NAS for auto shutdown (how it works with my readynas)
NiceCupOfTea said:
I don't need to run much - a NAS, and either another NAS or a USB drive, for long enough to shut down.
My NAS power consumption is rated at 17W.
Would something like this be enough?
Be aware that 17 watts is probably a net draw and you need the gross draw at the power plug. Having said that , with 2 NAS's you would probabaly last 40 min easilyMy NAS power consumption is rated at 17W.
Would something like this be enough?
How are you going to automagically shut down the NAS? does it have some sort of UPS interface? what brand/model of NAS?
The other thing you need to bear in mind with UPS is they generally come in 3 flavours of technology
Offline / standby
Line-interactive
Double-conversion / online
Basically you get what you pay for. The online will suppress far more surges and brown outs than the others, potentially reducing data loss.
Online is what you would use in a data center / server room and if you can afford it and value your data highly, this is what I would buy. ( says he with no UPS
)
With a limited budget.....line-interactive at the very least esp if you are in an area susceptible to brown outs and outages.
further reading
http://en.wikipedia.org/wiki/Uninterruptible_power...
and an alternative to APC http://powerquality.eaton.com/Products-services/Ba...
Offline / standby
Line-interactive
Double-conversion / online
Basically you get what you pay for. The online will suppress far more surges and brown outs than the others, potentially reducing data loss.
Online is what you would use in a data center / server room and if you can afford it and value your data highly, this is what I would buy. ( says he with no UPS
) With a limited budget.....line-interactive at the very least esp if you are in an area susceptible to brown outs and outages.
further reading
http://en.wikipedia.org/wiki/Uninterruptible_power...
and an alternative to APC http://powerquality.eaton.com/Products-services/Ba...
Thanks chaps. I have a Buffalo Linkstation NAS which has a USB port and can be shutdown safely.
Does that UPS posted earlier have a USB shutdown capability?
I appreciate what you're all saying but really what I am looking for is some "protection" for my data - I have a surge protector already and will be running regular backups, but ideally would like something that allows it to shutdown safely in the event of an outage (not that we have them often).
Does that UPS posted earlier have a USB shutdown capability?
I appreciate what you're all saying but really what I am looking for is some "protection" for my data - I have a surge protector already and will be running regular backups, but ideally would like something that allows it to shutdown safely in the event of an outage (not that we have them often).
I have only ever used this brand but much bigger,i have had two 2nd used units of Ebay powersellers and in over 3 years have not so much as had to renew the batteries APC are a top quality/corporate brand
http://cgi.ebay.co.uk/APC-Back-ups-CS-350VA-USB-SE... this may do you
everthing can be shut down with the software via the attached cable.
http://cgi.ebay.co.uk/APC-Back-ups-CS-350VA-USB-SE... this may do you
everthing can be shut down with the software via the attached cable.NiceCupOfTea said:
Interesting - hadn't considered s/h or refurb'ed.
One more question - a lot of them want kettle leads to power the equipment, but that's not much use for things with wall warts - any suggestions?
Buy standard multibox, chop off normal wall wart and put on female jug socket. works for me One more question - a lot of them want kettle leads to power the equipment, but that's not much use for things with wall warts - any suggestions?

ETA
ie one of these
http://www.stayonline.com/iec320-c14-adapters.aspx
Edited by lestag on Monday 29th March 12:56
NiceCupOfTea said:
Interesting - hadn't considered s/h or refurb'ed.
One more question - a lot of them want kettle leads to power the equipment, but that's not much use for things with wall warts - any suggestions?
You need one of these then http://www.revealcable.co.uk/acatalog/info_AA3815....One more question - a lot of them want kettle leads to power the equipment, but that's not much use for things with wall warts - any suggestions?
http://www.powersuppliesonline.co.uk/product/0-70-...
Edited by Simon Says on Monday 29th March 13:19
NiceCupOfTea said:
Aha! Although I think I'll make my own and save £25!
Look again
the 1st one is cheaper here http://www.revealcable.co.uk/acatalog/info_AA3815....Edited by Simon Says on Monday 29th March 13:50
Simon Says said:
NiceCupOfTea said:
Aha! Although I think I'll make my own and save £25!
Look again
the 1st one is cheaper here http://www.revealcable.co.uk/acatalog/info_AA3815....Edited by Simon Says on Monday 29th March 13:50
I think I will still chop up one of my kettle leads and rewire a 4-way though.
Ordered the APC Back-UPS 350EI in the end.
NiceCupOfTea said:
Can't see an appropriate adaptor there, but if you mean just stick an IEC socket on the end of a 4-way I guess that would work?
Correct.The plug will probably cost you more than the 4 way, but overall still cheap.
You can buy a specialist 4 way already built this way but it will be twice the price.
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff




