37"-42" Plasma with VGA input?
Discussion
We're looking for a new plasma screen here at work, something around 37"-42", Plasma with a VGA input for connecting to a PC to run OCS. Full HD would be a bonus. Doesn't even need a tuner, but "TVs" seems cheaper than the equivalent "PC Screen" with the same features.
Looking to buy from a reputable supplier, with a decent guarantee. Any recommendations?
Looking to buy from a reputable supplier, with a decent guarantee. Any recommendations?
In my experience, connecting a pc to a tv via VGA never works properly.
Some plasmas have non-square pixels which makes getting the settings right a complete pain. You have to squash the picture or stretch it, realign it and no matter how much you fiddle it always looks awful, especially for viewing text.
My advice is get a dedicated monitor or find a way to connect to the tv via HDMI/DVI instead.
Some plasmas have non-square pixels which makes getting the settings right a complete pain. You have to squash the picture or stretch it, realign it and no matter how much you fiddle it always looks awful, especially for viewing text.
My advice is get a dedicated monitor or find a way to connect to the tv via HDMI/DVI instead.
LeoSayer said:
In my experience, connecting a pc to a tv via VGA never works properly.
Some plasmas have non-square pixels which makes getting the settings right a complete pain. You have to squash the picture or stretch it, realign it and no matter how much you fiddle it always looks awful, especially for viewing text.
My advice is get a dedicated monitor or find a way to connect to the tv via HDMI/DVI instead.
What our friend Leo says.Some plasmas have non-square pixels which makes getting the settings right a complete pain. You have to squash the picture or stretch it, realign it and no matter how much you fiddle it always looks awful, especially for viewing text.
My advice is get a dedicated monitor or find a way to connect to the tv via HDMI/DVI instead.
Get a DVI to HDMI converter cable and DVI out of the PC to an HDMI input. Cable will cost you upwards of about 12 quid.
Bear in mind that a 15-pin DSUB is analogue, whereas your DVI / HDMI combo will be completely digital - much nicer.
I am afarid to say I have to disagree with the above two posts. I have always found conecting with a VGA cable completely pain free and with excellent results. All major GPU manufacturers have drivers that support modern TV resolutions. In fact the only time I had a problem was when I tried to connect with a HDMI cable. The GPU would not allow me to choose the resoltion compatible with the TV, 1366x768, and everything else looked rubbish.
Road2Ruin said:
I am afarid to say I have to disagree with the above two posts. I have always found conecting with a VGA cable completely pain free and with excellent results. All major GPU manufacturers have drivers that support modern TV resolutions. In fact the only time I had a problem was when I tried to connect with a HDMI cable. The GPU would not allow me to choose the resoltion compatible with the TV, 1366x768, and everything else looked rubbish.
Agree with that. I had forgotten that the latest S20 and X20 PANASONIC plasmas no longer have VGA in. Sold a few to a local school and couldnt for the life of me, get the VGA to HDMI converter to work properly. Ended up supplying the G20 wth VGA in and all was rosyWe currently have 3 or 4 screens around the business, all running fine on VGA. Can't buy the same screens though as they are no longer made - hence looking for a recommendation for a new one.
I have found one which has VGA, DVI and HDMI - Panasonic 42" Plasma, 400hz, 1080p etc. etc. on dabs.com
That looks like the cookie, as I am very happy with my Panasonic at home.
I have found one which has VGA, DVI and HDMI - Panasonic 42" Plasma, 400hz, 1080p etc. etc. on dabs.com
That looks like the cookie, as I am very happy with my Panasonic at home.
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff


