1999 Alfa Romeo 145 Cloverleaf Parts Needed.

[integra1799]

This is starting to feel like a lost cause. I'm after some parts for. 1999 Alfa Romeo 145 Cloverleaf.

I'm looking for a front cross member needs to be in fairly decent condition and not full of rust and I also need the left and the right hand side front bumper supports also in decent condition.

I've contacted some Alfa specialists to no avail. eBay is also thin on the ground. Alfa don't seem to be selling these parts anymore hence my plee on here that someone may have or know where I could get these parts.

Fingers crossed someone can point me in the right direction.

[Zombie]

You've tried the 145.com forum and 155.org guys, yes?

[Vitorio]

If these parts are QV specific, you might want to check out the Junior versions of the 1.4 and 1.6, those had QV like body kits. The 146 Also had a Ti version, which was basically a QV (same 2 litre TS)

[integra1799]

Zombie said:

You've tried the 145.com forum and 155.org guys, yes?

A friend of mine is going to try on those forums as it's not actually my car and the owner isn't a member on here. So i thought i would just put out a request to see if anyone else had any ideas.

[integra1799]

Vitorio said:

If these parts are QV specific, you might want to check out the Junior versions of the 1.4 and 1.6, those had QV like body kits. The 146 Also had a Ti version, which was basically a QV (same 2 litre TS)

Excellent! Thanks for the advice i will check around and see if the parts are the same. Alfa don't actually make the parts anymore, i've emailed all the Alfa specialists and parts suppliers and nobody has these parts. But i'll keep looking around, i should think all these 145's suffer from the same rust issues as this one were trying to get parts for.

[waynedear]

Try Nathan at clover breakers.