New wheels Cerbera
Discussion
Norwegian said:
I would like to buy me som 18" wheels on my 1996 Cerbera 4.2, but I dont know the offset (5x???) and the ET of the car, and if someone knows which tyre dimension to use, I would be very grateful
Thanks
Hi Peik
I was looking into this a while back and wrote down these figures on a scrap of paper. Unfortunatley they no longer mean anything to me, but you might be able to decipher them!
PCD: 5 Stud 114.3
8.5 x 18 0542
114.3 is the offset i think? No idea what 0542 is, but the others should be obvious.
Did a lot of research on this one... and there do seem to be slight differences across the models at different years.... the PCD didnt change once it switched over to 5PCD 114.3, but the offsets did vary.
Take your wheels off, and measure the distance from the centreline to the hub facing side.
On 18's:
Tyres wise, recommended are for rear 255/35/18
and fronts 235/35/18.
Take your wheels off, and measure the distance from the centreline to the hub facing side.
On 18's:
Tyres wise, recommended are for rear 255/35/18
and fronts 235/35/18.
Gassing Station | Cerbera | Top of Page | What's New | My Stuff


