Waterproofing soft tops
Discussion
check this link http://www.amazon.co.uk/Plan-Soft-Cleaner-Protecti...
i have seen a video on the web showing a top being washed/cleaned, then getting the waterproof treatment.
but cant seem to find it at the mo.
i have seen a video on the web showing a top being washed/cleaned, then getting the waterproof treatment.
but cant seem to find it at the mo.
Be careful. I once used the 2 part Turtle wax cleaner / waterproofer and it cleaned the roof so well that it became very porus, even after I had used the second can to waterproof it. I had followed the instructions! After a few appeals a TVR dealer I knew recomended Thompsons Waterproofer (it does what it says on the tin). I didn't think it would work or that it would crack but it was excellent!
I use Grangers Fabsil, but I wouldn't want to spray silicon waterproofer on any car paintwork. It's easier and safer to brush it on.
Check out Renovo products. I've got 2 soft tops and water beads off like you want. There's 2 products for waterproofing - one's a colour restorer which does offer waterproofing, the other is a brush on water repellent, which is what makes the water run off.
So good, I'm about to buy the stuff for my f-i-l's boat cockpit cover and canopy.
So good, I'm about to buy the stuff for my f-i-l's boat cockpit cover and canopy.
careful how you clean the hood, some cleaning stuff could leave marks
I suppose you could use a vacuum cleaner with soft brush attachment before and after cleaning to lift pile but make sure the head is clean and roof fully dry
On my TVR roofs I used a velcromatic style clothes dust and lint 'brush' (similar to the ones they used to advertise in the 70s) that brought the pile up nicely after or instead of cleaning
then when clean and fully dry I think I once carefully sprayed with Fabsil (blue can then) check the label first now in case your hood is of different material to that hood and in case they've changed the chemicals in spray
http://www.amazon.co.uk/Grangers-Fabsil-Waterproof...
I've also use Renevo and Auto-Glym and wasn't that impressed with either
I've got a proper plastic hood now so I don't have to tart about
I suppose you could use a vacuum cleaner with soft brush attachment before and after cleaning to lift pile but make sure the head is clean and roof fully dry
On my TVR roofs I used a velcromatic style clothes dust and lint 'brush' (similar to the ones they used to advertise in the 70s) that brought the pile up nicely after or instead of cleaning
then when clean and fully dry I think I once carefully sprayed with Fabsil (blue can then) check the label first now in case your hood is of different material to that hood and in case they've changed the chemicals in spray
http://www.amazon.co.uk/Grangers-Fabsil-Waterproof...
I've also use Renevo and Auto-Glym and wasn't that impressed with either
I've got a proper plastic hood now so I don't have to tart about

Edited by na on Wednesday 11th May 22:46
andyroo said:
Another positive for autoglym. I actually ran out after few sprays on my new car and haven't gotten round to buying more, and despite washing the car quite a few times in the six months I've had it, there are still the same few patches that bead up! I need to buy some more!
Good stuff,I`ve used it for years on my old classic and my SL320,just don't leave any drips on the paint work as it sticks like glue.Gassing Station | Classic Cars and Yesterday's Heroes | Top of Page | What's New | My Stuff




