MOT advisory - rusty bottom
Discussion
Wire brush to clean off any flaky bits, then I'd use an underseal which contains Waxoyl.
Just used some on the black painted bit of the sills on mine, as well as the flange and the couple of inches of the floor adjacent to the sills.
Going to get under it and do the rest as soon as I find time.
Just used some on the black painted bit of the sills on mine, as well as the flange and the couple of inches of the floor adjacent to the sills.
Going to get under it and do the rest as soon as I find time.
Gassing Station | Mazda MX5/Roadster/Miata | Top of Page | What's New | My Stuff




