4.0 HC clutch replace

[Golflion]

Want to change clutch at some point as now due,anyone in West Yorkshire area offer help/advice.
I have a pit in the garage which should make the task easier.

If i have to travel for assistance/help i will do?

Edited by Golflion on Wednesday 11th May 21:01

[darkcat]

just a note from the garage that did mine - tvr, in theor wisdom, made the bottom chassis rails too close to drop the gearbox + bell housing out.

was easier to pull the whole engine out

[Simon says]

If its the T5 gearbox you don't need to worry about the bellhousing fouling the chassis as you remove the box from the bellhousing 1st the (bolts are external) the you remove the bare bellhousing to get to the clutch assy

[M@H]

darkcat said:

was easier to pull the whole engine out

!? ..at what point did they split the exhaust, bottom of the Y piece or at the top ?

[Golflion]

Its the T5 gearbox luckily!

Going to purchase the clutch kit from V8 Developments unless someone tells me of better kit elswhere?

Edited by Golflion on Thursday 12th May 11:46