Discussion
2.5bluenob said:
Hi all, My brake bleeding nipples look as if they are leaking from the thread. Can PTFE tape be used or will it be eaten bby the fluid
Cheers
Steve
Definitely do not use PTFE tape on those threads. Sealing surface is on the taper at the end of the bleed screw, and a good seal should require relatively little torque. If there is any evidence of corrosion on the taper just replace with a new one. Cheers
Steve
JLSELAN said:
2.5bluenob said:
Hi all, My brake bleeding nipples look as if they are leaking from the thread. Can PTFE tape be used or will it be eaten bby the fluid
Cheers
Steve
Definitely do not use PTFE tape on those threads. Sealing surface is on the taper at the end of the bleed screw, and a good seal should require relatively little torque. If there is any evidence of corrosion on the taper just replace with a new one. Cheers
Steve
Gassing Station | Noble | Top of Page | What's New | My Stuff


