Replacement pinstripes?

[JMF894]

Hello chaps I was wondering if anyone knew where I might be able to get some new pinstripes for the wedge. TBH it's only the front, from the wheel arch forward that need doing.

Anyone?

Cheers me dears

Jim

Edited by JMF894 on Wednesday 25th May 15:38

[pwd95]

Hi Jim, had mine from SparesWorld when I did the 450SE.

http://www.sparesworld.co.uk/acatalog/sw_store.htm...

Looks like they're South Wales based though. Can pop in if you like. Measure the width of them if you can just to make sure, or send me a tracing.

Here's my old thread...
http://www.pistonheads.com/gassing/topic.asp?h=0&a...

Edited by pwd95 on Saturday 21st May 19:54

[GV]

Halfords do 'em - but not sure of the quality compared to the factory's

[simonwedge]

I got mine off ebay

[Tasmin 200]

GV said:

Halfords do 'em - but not sure of the quality compared to the factory's

Where do you think TVR got them from?

[JMF894]

Cheers all, will have a look.

Jim

[JMF894]

Sorted! Ebay. Black with 3mm solid, 3mm gap then 1.5mm solid

[adam quantrill]

The factory originals were made by 3M, but I have seen a lot of replacements and different styles when I looked round all the Wedges a couple of BBWF's ago.

I bought a few reels in the States a few years ago but the 3M ones are hard to get over here.

[GV]

I gave up on the Halfords type becuse they looked rubbish once on the car - cheap and too thin IMO.

[JMF894]

The ones I've bought of ebay are the same measurements as the ones on the car. Haven't arrived yet but once they have i'll let you know if they look ok.

Jim

[TOPTON]

I bought some off fleabay and they turned out to be spot on, same measurements and colour as originals.

[JMF894]

Here we go........

New pinstripe forward of the wheel, old behind it




Jim

Edited by JMF894 on Wednesday 25th May 15:31

[JMF894]