Which type of wheel spacers to use or recommend please .....

[TOYMOTA LOZZA]

Ok I want to space out my rear wheels on my Corolla T-sport by 15-20mm each side.

Now the dilema is there are 2 types on the market for my car.

Type no.1
http://www.srbpower.com/products/H%26R-%22TRAK%22-...

The hub-centic where the spacer bolts into where the old studs use to be and the new spacer comes with studs attached to that

Type no,2

I use longer wheel studs and go for a slide on 15-20mm spacer.


If it was you, what would you go for and why ?

[DocJock]

Hub centric, particularly for that size.

They have a lip which supports the weight whereas the flat spacers have all the weight supported by the studs only.

[gareth_r]

There is no dilemma - always hubcentric. Mr T machined those spigots on the hubs for a very good reason.

[TOYMOTA LOZZA]

gareth_r said:

There is no dilemma - always hubcentric. Mr T machined those spigots on the hubs for a very good reason.

Job done then

[wilbo83]

Another vote for hubcentric, i am running spacers front and rear on my celica and no way i would use slot on. Just make sure you get a decent set of hubcentric, not cheap ebay jobbies, i would recommend freakyparts (drop stewart a message and he should be able to get you a set made up)

http://www.freakyparts.co.uk/

[TOYMOTA LOZZA]

wilbo83 said:

Another vote for hubcentric, i am running spacers front and rear on my celica and no way i would use slot on. Just make sure you get a decent set of hubcentric, not cheap ebay jobbies, i would recommend freakyparts (drop stewart a message and he should be able to get you a set made up)

http://www.freakyparts.co.uk/

Thank you mate

[gareth_r]

H&R spacers are TUV certified, they'll be fine.

http://www.h-r.com/gb/f_spurverbreiterung.php

[TOYMOTA LOZZA]

gareth_r said:

H&R spacers are TUV certified, they'll be fine.

http://www.h-r.com/gb/f_spurverbreiterung.php

Awesome thank you mate