Front Wishbones on a Tuscan Racer?

[Mr Plow]

Hi

Does anyone have a picture of the front wishbones used on the Tuscan racers?

Currently building a tuscan chassis based race car, and having a bit of trouble with the front wishbones that I have, more than likely going to make some from scratch. Do they run with ball joints from a specific car or use a different set up?

Any advice appreciated.

Thanks in advance.

[Graham]

Rose joints on chassis end. JAG xj6 upper and lower ball joints on hub carrier

[Mr Plow]

Hi Graham

Thank you very much for the reply, just the info I need.

Regards

Liam

[RetroWheels]

Here's a pic (sounds like an interesting project BTW)..

[kg55]

RetroWheels said:

Here's a pic (sounds like an interesting project BTW)..

I need the near side wishbones, exhust u bends, radiator, hoses,dampers,and the entire front end of the chassis please. Thanks in advance Darron

[RetroWheels]

I've no spare bits spare Kev , but i do have strong alchohol that we can share next week .

[NTEL]

kg55 said:

I need the near side wishbones, exhust u bends, radiator, hoses,dampers,and the entire front end of the chassis please. Thanks in advance Darron

I've got lots of steam pipe Kev. It works well in a chassis. Thats what the front end of my Taz is made of!!!!!!!!!!!!!

[Tall Bloke]

RetroWheels said:

I've no spare bits spare Kev , but i do have strong alchohol that we can share next week .

I hit the bottle Monday night Darren

[RetroWheels]

Are you at Brands Matt ?

[Tall Bloke]

Yep , hope to get down on the Friday night ! Plan A is to drive Martine truck down for him if it pass Mot ! If not it's plan B what ever that mite be ...

[450Nick]

Don't know if you'd be interested but I have custom built front top wishbones on my car using a third rose joint at the hub and different length arms. The bottom ones are also strengthened. I could stick a pic up if you like as I believe these were engineered as an upgrade part to improve castor and steering geometry.

[Geoff38]

Hi , I need upper wishbones for my project car too (if you get some made up , let me know and could do a group buy ? ) , I have the lower ones if you want pictures of those ? Has anyone used different hub carriers / uprights ? I was wondering if Tuscan road car ones would be ok ?

Cheers
Geoff.